11 safety recalls published for the Freightliner Argosy (1999–2018).
An internal clutch component may be outside specification and fail, which could cause this clutch component to inhibit clutch departure.
Fuel may leak from the pressure fuel line.
Brake caliper mounting bolts may not provide adequate clamping force between the brake caliper and brake anchor plate.
Fuel may leak from the engine's high pressure fuel rail feed lines.
In extreme circumstances the Automatic Brake Slack Adjusters may fail.
It is possible that standard bolts rather than metric bolts may have been used in production to attach the brake caliper to the anchor plate at each wheel assembly. Incorrect bolt…
Certain Douglas Autotech steering columns may have been manufactured without two welds which could cause the column to fatigue and fracture over time, thereby allowing the steering…
Due to a manufacturing fault in the Bendix SR-7 modulating spring brake valve housing, air could intermittently enter the spring brake when the parking brake is applied instead of…
The steering shaft U-joint pinch bolt on some right hand drive vehicles may not have been correctly torqued during production. In this case the pinch bolt may become loose and fall…
The steering gear mounting bracket missed a machining process and the bolts that secure the steering gear may have incorrect thread penetration into the gear body, either or both o…
The brake pedal pivot and roller pin retaining clips may not have been correctly installed. If this occurred, the pins might become dislodged, resulting in an inability to apply t…