13 safety recalls published for the Kia Kia Carnival (1970–2021).
Due to a manufacturing issue, the Airbag Control Unit (ACU) cover and the Electronically Erasable Programming Read-Only Memory (EEPROM) chip may have been produced with insufficien…
Due to a manufacturing issue, the locking mechanism on the right-hand sliding door may not latch and could remain stuck in the open position.
The fuel supply pipe may have been damaged during manufacturing, which may result in a fuel leak.
The positive terminal on the alternator may not have been tightened to specification during assembly. Should the terminal become loose, this may increase the resistance to the alt…
The fuel rail in petrol vehicles may develop a small heat induced crack, which can result in fuel leakage.
Due to a supplier assembly error, the seat belt buckle for the second-row middle seat may have been installed on the wrong side of the seat, thereby preventing proper use of the 3-…
The software that controls the power sliding door may not detect certain obstructions. As a result the power sliding door may not auto-reverse when an obstruction is in the door op…
Due to a manufacturing issue, the vacuum hose to the brake booster may become weak over time resulting in the potential for the hose to collapse when vacuum is applied. This could…
There is a potential that during the manufacturing process that a misalignment of the brake booster centre plate and assembly jig may have occurred and caused the o-ring in the bra…
There is a possibility that due to a design flaw the stop lamp switch may not operate correctly. As a result of this concern:- The brake lights may not illuminate when the brake pe…
The wiring associated with the power front seat may cause overheating of the circuit breaker in the interior fuse box.
A potential concern with the wheel bearing cap. This concern, if not rectified, may allow water ingress to the wheel bearings
Improper welding procedure in the production process of the brake pedal assembly.