13 safety recalls published for the Peugeot 308 (2015–2025).
Due to a manufacturing defect, the threaded connection between the high-pressure fuel pump and the fuel rail may become loose. If this occurs, fuel may leak in the presence of an e…
The timing belt may degrade due to aged engine oil. If left unrepaired it may result in a reduction or a loss of braking performance.
On affected vehicles, the cooling strategy and maximum temperature alert might cause engine overheating.
The front wishbone bolts may not be to the correct specification and may break.
The steering rack assembly may have been incorrectly tightened.
A software error may lead to the engine stalling in certain driving conditions.
Possible contact between the fuel return pipe and the fuel filter support bracket.
There is a possibility for the seat backrest to fold inadvertently when adjusting the seat position and seat position sensor failure.
In rare cases the bonnet may require replacing if the striker is found to be insufficiently secured.
The recall of the affected vehicles is to replace the Brake Master Cylinder. This action is necessary to eliminate the possible deterioration of braking efficiency under certain op…
The recall of the affected vehicles is to replace the Brake Master Cylinder. This action is necessary to eliminate the possible deterioration of braking efficiency under certain op…
There is a chance that the alternator wiring harness may be incorrectly positioned and be rubbing on the metal bracket which is bolted to the engine beside the alternator.
The incorrectly specified Relay Unit could deteriorate over time and cause various operating faults and in rare cases may lead to the failure of other equipment.