Every safety recall published by the Australian government, searchable and filterable.
The position of the lighting control ring is incorrectly detected by the lighting management system.
The engine coolant bleeder hoses quick connectors may not sufficiently seal towards the spigot on the coolant expansion tank, potentially resulting in loss of engine coolant and/or…
There is a design flaw with the wiring to the door trim illumination.
There is an issue with the wiring that controls the illumination of the speaker.
The gas pipe may have been fitted in the wrong area and may need to be moved.
The Automatic Transmission Shift Cable Bracket fitted to affected vehicles may not meet specification. This may result in the bracket cracking or breaking.
There is the possibility that after extended periods of driving in severe road conditions, the bonnet striker may develop a fatigue fracture.
There is a possible non-conformity in the assembly of the wheelhouse and its repective heat shield.
There is a possibility that the Automatic Transmission Shift Cable Bracket fitted to the affected vehicles may have unnecessary welding and may not meet specification. This weld co…
The gas pipe for the hot water service may have been damaged during manufacture of the motor home.
Selected motor homes may have been manufactured with a screw that has been screwed through the floor, possibly piercing the wiring loom.
Air bag control unit software non-compliance in cases of side impact.
There have been instances where the M20 bolts for the spring brackets for the driven axle and tag axle, have not been tightened to the correct torque during production.
The horn may fail to operate due to the routing of the electrical harness inside the steering wheel pad.
The affected vehicles are not compliant with the latest ADR regulations. The vehicles are fitted with a lap belt on the passenger side instead of a lap sash belt as per ADR regulat…
A number of vehicles may have been delivered with deficient quality in the welding that holds the foot plate to the brake and clutch pedal.
The circuit resistance of the Accelorator Position Sensor (APS) and Throttle Position Sensor (TPS) in the wire harness may increase due to a defective ground connection between APS…
It is possible that the top of the motorcycle rider's shoe cold hit the right lower fairing while braking. This obstruction may result in the rider not being able to apply the brak…
The spring band clamp mounted on the radiator hose connection to the water inlet pipe spigot may not sufficiently secure the hose, potentially leading to the hose coming loose duri…
Distance between the diesel return pipe and engine acoustic cover could be insufficient. A holding fastener must be placed on the fuel return pipe to prevent any contact with the e…
A limited number of 6MT gearboxes were produced without a necessary lubrication supply passage. The lubrication passage is designed to ensure longevity of the transmission, and no…
The Owner's Manual does not contain any information regarding sunroof operation.
A condition can occur under specific operating conditions where the tailgate may unlatch when impacted rearwards with sufficient energy by unsecured objects placed in the rear carg…
The rear reflector may not meet the required manufacturing standard.
The valve spring material may not have sufficient strength.