Every safety recall published by the Australian government, searchable and filterable.
The Camshaft Position Sensor located on the engine may function intermittently. If the censor should fail the engine may stall.
There is a possibility that the latches securing the saddlebags to the vehicle may break if large force is applied. Continued use of the vehicle with the saddlebag latch broken cou…
There is a possibility that the rear carrier may break if a mounted luggage system is installed. This could result in the luggage carrier becoming detached from the vehicle creatin…
On affected models, during use the 1/4 turn filler cap may leak from the sealing area of the filler cap and fuel tank.
A small number of seat riser boxes were supplied by Isringhausen which do not fully comply with ADR requirements for structural strength. Should a vehicle with a faulty seat riser…
In isolated cases the power-operated tailgate on vehicles may close unexpectedly and abruptly, shortly after being opened using the power function.
The pant leg of some riders can come in direct contact with the exhaust pipe, thereby possibly causing it to char or burn.
The pant leg of some riders can come in direct contact with the exhaust pipe, thereby possibly causing it to char or burn.
A certain number of vehicles built between 26 and 30 October 2006 may have been assembled with incorrect tyre size (90/90-19) instead of specified size (100/90-19).
Certain vehicles may have a vibration at the mounting location of the bank angle sensor which, if combined with any misrouting of various wires that impinge on the sensor or its pi…
Where the battery voltage is abnormally low the ABC ECU may be out of conformity in relation to the specifications required by the manufacturer. This non-conformity may in rare ca…
There is a possibility that in isolated cases a gradual loss of gas can occur in the gas generator for the curtain airbags, thereby causing the airbag not to inflate when required.
A potential problem with the reara brake caliper carrier positioning stud (stop bolt) which could result in brake caliper carrier movement, thereby possibly causing damage to the r…
There have been instances of leakage from the return fuel line on ethanol-driven buses with a DSI9E engine.
In the subject vehicles equipped with N04C-TF engine (turbocharger with waste gate system), when repeatedly accelerating at high speed, excessive vibration may be generated within…
Some of the steel used in the manufacture of the tanks has inconsistent levels of tensile strenth. Some of the tensile strenth is below the tensile strength required by AS/NZS 1594…
The close proximity mirror has mistakenly been manufactured from incorrect raw materials. The materials in the existing mirrors are more fragile than they should be and risk cracki…
During heavy winching operations, there is a possibility that the welds on the bullbar adaptor mounting brackets which attach the bullbar to the vehicle may fracture and in the wor…
In rare cases the rear cross-member and the rear small side members do not comply with manufacturer's specifications.
The original engine managment software can, in rare cases, cause the engine to stall in cold temperatures.
In rare cases, the Exhaust Gas Recirculation Valve (EGR) may cause hard starting/stalling and cause the engine diagnostics warning light to illuminate on the instrument panel.
In rare cases, the Exhaust Gas Recirculation Valve (EGR) may cause hard starting/stalling and cause the engine diagnostics warning light to illuminate on the instrument panel.
There is a possibility the front axle wheel hubs fitted to these trucks may crack if subjected to overload overload conditions, or from excessive tensioning of the wheel nuts, duri…
There is a posibility the door foot pads may break.
The rubber grommets for the alternator protective casing are too soft. As a result, the grommets work loose and the alternator cables chafe against the metal edges and break.