Every safety recall published by the Australian government, searchable and filterable.
THE LOCK-NUT SECURING THE FRONT STEERING LINKAGE (DRAG LINK) MAY LOOSEN IN SEVERE DRIVING SUCH AS OFF-ROAD OR UNMADE ROAD CONDITIONS. POSSIBILITY EXISTS THAT LOSS OF STEERING CON…
Electrical Ecm Incorrectly Programmed Which May Cause The Makchine To Surge Forward Upon Startup.
The Drive Coupling Between The Lh't' Box And The Vehicle Steering Box Can Become Loose Which Would Cause The Spines To Wear And Possibly Slip, Which Could Lead To A Loss Of Steerin…
The Applied Seat Belts Do Not Have The Energy Absorbing Feature In The Webbing Area.
The Propel Speed Select, Steering Mode Select And Parking Brake Contact Blocks May Fail Under Certain Conditions.
The Protective Rubber Seals That Form Part Of The Steering Track Rod May Be Incomplete And May Allow Water And Debris To Enter The Track Rod Thus Possibly Causing Premature Wear.
During Assembly Of The Steering Gear, The Rackbar And Inner Ball Joint Housing Are Staked (crimped) After The Correct Attaching Torque Has Been Achieved. On A Small Number Of Ass…
The Front Suspension Lower Ball Joints Have Polyacetal Plastic Seats And May Have Ball Pins With A Rough Surface Resulting In Rapid Wear With Possibility Of Joint Separating And Re…
On The Sash Guide Of The Front Seat Belts An Incorrect Welding Process May Have Occurred On The Weld Nut For The Bolt Used To Secure The Shoulder Anchor Point And May Not Guarantee…
Floor Mats May Interfere With The Accelerator Pedal Which Could Potentially Result In The Engine Not Returning To Idle.
Possibility Of Incorrect Tension Of Steering Rack Assembly Mounting Bolts During Vehicle Assembly.
Reversal Of 3rd Lever Implement Control When Updating Software Resulting In Implement Control Reversing.
May Have Been Fitted With The Incorrect Specification L/h/f Seat Belt Which May Not Provide The Desired Occupant Protection In The Event Of A Full Frontal Impact.
The Cab Mounting Bolts May Need To Be Tightened.
Steering System Is Difficult Or Hard To Steer In Rough Applications.
Hydraulic Hose Bracket Can Break Resulting In Hydraulic Hose Hitting The Cab Window.
Potential Exists For Inadvertent Passenger Airbag Deployment Due To Electrostatic Build Up.
Protection Skid For The Pitman Arm And Locking Plates On The Steering Pivot Arm Mounting.
The Drivers Side Airbag May Deploy Inadvertently Under Certain Conditions.
Replacement Of Bolts On The Steering Arms On The Front Axle.
The Outer Casing Of The Bushes Fitted To The Front Lower Control Arms May Split And Partially Dislodge From The Arm Which May Result In Unstable Steering.
Some Steering Gears May Have Been Assembled With An Incorrectly Hardened Rack Bar.
Steering Assemblies May Have Racks Over Hardened.
Right Hand Steering Mount Bracket May Suffer From Either Stress Fractureds Or Weld Fatigure.
Possibility Of Drive Belt Losing Tension Resulting In The Loss Of Power Steering Assistance.