Every safety recall published by the Australian government, searchable and filterable.
Some vehicles may experience heater tap coolant leaks. These leaks can ingress into electrical connectors via the wiring harness.
There is a possibility that the fuel pump may wear prematurely due to insufficient clearance between the coils of the internal motor. If vehicle operation continues in this conditi…
The affected LPG tanks may have a service valve hand tap fitted with undersized O-rings.
The affected LPG tanks may have a service valve hand tap fitted with undersized O-rings.
Due to the shape of the gearshift select lever cable retainer clip, there is a possibility that the clip may impact the gearshift select lever bracket if excessive lateral force is…
Investigations reveal that when Hilux 4x4 GGN25 and KUN26 model vehicles are fitted with a Toyota genuine bullbar (equipped with additional turn signal lights) and are operating a…
There is a possibility that the vehicle's engine hood (bonnet) inner panel may crack in the proximity of the striker (part of the retaining latch mechanism) due to prolonged drivin…
Engine poor/erratic idling quality and stalling. Recall is to download a revised calibration into the engine management systems as well as carry out a range of checks and adjustme…
It is possible the Axilok rear wheel spindle nuts on rear drive axles of certain Sterling A/L-Line trucks built at the St. Thomas plant between 2 April 2007 and 20 June 2007 may ha…
The lower front shock absorber mounting bracket has been incorrectly manufactured and may fail as a result. If this happens it could potentially foul the steering linkage impeding…
Concerns with the internal mechanism of the ISC valve which may cause valve operation failure.
07E-038. After prolonged use of the Parker SCV, the valve body retainer may become excessively worn and eventually break apart. Bendix estimates that the wear-through breakage can…
LPG liquid could escape from the hand tap spindle, due to undersized o'rings which were provided as part of a faulty batch.
The brake master cylinder may have been incorrectly assembled.
The mounting bolts may be incorrect and could fail while riding.
A defect relating to vehicle safety exists due to a potential failure of the stop lamp switch, resulting in the stop lamps failing to function when the brake pedal is depressed. Th…
During production of the cable an oversize end lug may have been used which could lead to the positive starter cable separating from the end lug.
It is possible that the rear suspension may collapse during riding due to the bearing installation part of the suspension arm breaking. It could become damaged by a stress corrosio…
In the event of a severe accident the fuel tank could develop a leak.
The plug contact at the positive terminal of relay socket No. 3 may have been widened due to a production error.
During the production process, one or both of the accelerator pedal securing nuts may not have been fitted correctly or are missing.
There have been instances where the thread between the nut and the bolt for the clamp for the track rods ball joint has been cut during tightening in production. The reason for thi…
There is a possibility the radiator cooling fan blade may break, damaging the radiator and causing possible engine damage.
The airbag computer is configured without the passenger pretensioner although it is fitted, so in the event of an impact, the pretensioner cannot be triggered.
The functioning of the front seat belts may be affected and the means of restraint diminished.