Every safety recall published by the Australian government, searchable and filterable.
The Fuel Line Between The Fuel Tank And Fuel Filter May Operate Incorrectly And Restrict Fuel Flow To The Engine.
A Fuel Line Inside The Fuel Tank May Operate Incorrectly And Restrict Fuel Flow To The Engine.
Potential Failure Of The Handlebars. The Original Handlebars Will Be Replaced By An Improved Re-design Handlebar.
The Lower Part Of The Front Seat Belts May Contact The Edge Of The Backrest Recliner Mechanism Housing, Behind The Seat Valance. Repeated Contact Of This Nature May Eventually Cau…
Possible Seizure Of The Transmission Components Resulting In Rear Wheel Lock-up With Loss Of Control Of The Motorcycle.
Voltage Peaks Caused By Different Items Of Electrical Equipment Such As Relay For Horn, Can Lead To Accidental Triggering Of The Drivers Airbag Which Can Cause Injury.
Defect In The Front Seat Belts May Cause The Pre-tension Device Not To Deploy In An Accident Or Possibly Result In Risk Of Fire In The Base Of The Pillar Where The Seat Belt Retrac…
The Specified Torque Setting For The Upper And Lower Control Arm To Rear Suspension Arm Bolts May Not Have Been Achieved In Production Resulting In Poor And Unpredictable Vehicle…
May Be Equipped With Cruise Control Cables That Are Too Short Causing One End Of The Cable To Unclip And Possibly Interfere With The Throttle Cable.
Possibility Of The End Of The Automatic Gearbox Breather Pipe 'icing Up' In Extreme Sub Zero Ambient Temperatures.
Rear Seatbelts May Not Fully Meet The Requirements Of ADR 4/01.
Potential Problem Exists With The Autolive Seatbelts Pd012 And Pd013.
The Lift Cylinder Rod Could Experience A Weld Failure.
Possibility That The Engine Cam Sprocket Bolt Could Lose Their Clamp Loads And Or Break, Thus Causing The Engine To Quite Running Or Run Erratically Before Quitting.
Deterioration Of The Bonnet Liner May Occur Allowing The Non-rigid Sound-deadening Material To Sag So That It Comes Into Contact With Moving Components Of The Throttle Mechanism.
The Centre Seat Belt May Have A Faulty Tongue And/or Mounting Plate Which May Fail Due To Insufficient Strength.
May Not Fully Meet The Requirements Of ADR 4/02. The Seat Belt Retractors Do Not Allow Easy Withdrawal Of The Webbing Through The Full Angular Range Specified By This ADR.
Do Not Fully Meet The Requirements Of ADR 4/01. The Seat Belt Retractors Do Not Allow Easy Withdrawal Of The Webbing Through The Full Angular Range Specified By This ADR.
Do Not Fully Meet The Requirements Of Adr4/01. The Seat Belt Retractors Do Not Allow Easy Withdrawal Of The Webbing Through The Full Angular Range Specified By This Adr.
Do Not Meet Fully The Requirements Of ADR 4/01. The Seat Belt Retractors Do Not Allow Easy Withdrawal Of The Webbing Through The Full Angular Range Specified By This ADR.
Do Not Meet Fully The Requirements Of ADR 4/01. The Seat Belt Retractors Do Not Allow Easy Withdrawal Of The Webbing Through The Full Angular Range Specified By This ADR.
Do Not Meet Fully The Requirements Of ADR 4/01. The Seat Belt Retractors Do Not Allow Easy Withdrawal Of The Webbing Through The Full Angular Range Specified By This ADR.
Do Not Fully Meet The Requirements Of ADR4/01. The Seat Belt Retractors Do Not Allow Easy Withdrawal Of The Webbing Through The Full Angular Range Specified By This ADR.
Do Not Fully Meet The Requirements Of ADR 4/01. The Seat Belt Retractors Do Not Allow Easy Withdrawal Of The Webbing Through The Full Angular Range Specified By This ADR.
Do Not Meet Fully The Requirements Of ADR4/01. The Seat Belt Retractors Do Not Allow Easy Withdrawal Of The Webbing Through The Full Angular Range Specified By This ADR.