Every safety recall published by the Australian government, searchable and filterable.
The Front Tyre Fitted To These Vehicles May Deflate.
The Screw Joints For The Spare Wheel Carrier May Fail Due To Screw Joint Settling And The Torque Decreasing.
New Compliance To ADR 4/01 Clause 4.6 4.5Seat Belts Fitted At Incorrect Angle.
The Seat Belt Retractors Do Not Allow Easy Withdrawal Of The Webbing Through The Full Angular Ranged Specified By ADR 4/01.
May Not Comply With ADR 4/01. The Seat Belt Retractors May Not Allow Easy Withdrawal Of The Webbing Through The Full Angular Ranged Specified By The ADR.
Potential Weakness Has Been Found In The Wheel Due To An Incorrect Machining Operation, And Under A High Load And Speed Condition A Failure May Occur.
Does Not Meet Fully The Requirements Of ADR 4/01. The Retractors Do Not Allow Easy Withdrawal Of The Webbing Through The Full Angular Ranged Specified By This ADR.
A Weld Associated With The Rear Suspension Links May Fracture And Could Impair The Stability Of The Rear Hub Assembly Resulting In The Vehicle Deviating From A Straight Line Under…
May Not Meet Fully The Requirements Of Adr 4/01. The Retractors Do Not Allow Easy Withdrawal Of The Webbing Through The Full Angular Range Specified By This Adr But Will Still Lock…
Do Not Fully Meet The Requirements Of Adr3/01. - The Retractors Do Not Allow Easy Withdrawal Of The Webbing Through The Full Angular Range Specified By This ADR.
Do Not Meet Fully The Requirements Of ADR 4/01. The Retractors Do Not Allow Easy Withdrawal Of The Webbing Through The Full Angular Range Specified By This ADR.
Road Speed Limiter Correctly Adjusted But Not Sealed In Accordance With Australian Design Rule.
Possibility Of Inadvertent Airbag Inflation.
Potential For Loss Of Pressure From The Fuel Pump Outlet Pipe Within The Fuel Tank. Under Extreme Circumstance This Could Lead To A Loss Of Vehicle Control.
The Seat Belt Webbing Could Snag In The Slot In The Guide Escutcheon And Not Retract Correctly Resulting In The Driver Not Being Adequately Restrained In The Event Of An Accident.
Radiator Cap
Possibility Of Deformed Wheel Rims Which May Cause Premature Tyre Deflation.
Voiding Of Lift And Multi-purpose Bucket Cylinder Resulting In Movement Of Lift Arms And/or Bucket Clam.
A Lower Ball Joint Swivel Pin May Not Have Been Tightened To The Correct Torque Specification Which May Lead To Ball Joint Failure.
The Timing Belt Tensioner Does Not Absorb Engine Vibrations Efficiently, Causing The Spring Installed On The Timing Belt Tensioner To Break Resulting In Timing Belt Becoming Loose…
Vehicles Fitted With Version 1.14 May Stall Whilst The Vehicle Is Moving Slowly.
Welds On Brackets Of Seat Groups May Fatigue And Seat May Become Unstable.
An Oil Leakage Problem Could Arise From Radiator Oil Delivery And Oil Return Hoses And Cylinder Head Oil Deivery Hoses.
Possible Breakage Of The Clutch Driven Gear Drive Plate Causing Engine Lock-up With Loss Of Control Of The Motorcycle.
Tread Separation May Occur From The Casing On The Tyres.