Every safety recall published by the Australian government, searchable and filterable.
Swelling Of The Region Of The Fuel Tank Inlet May Result In A Detrimental Effect On The Rubber Gasket.
International N-series Vehicles With Air Operated Parking Brakes May Have A Fault In The Brake Circuit Plumbing.
Instrument Panel Wiring Loom May Become Abraded On The Lower Edge Of The Pedal Support Bracket.
Wire Forms On Motorcycle May Chafe On Battery Causing A Short Circuit.
Gear Selector Switch May Become Overloaded And Switch May Overheat And Fail.
Throttle-kickdown Cable May Chafe Against Brake-pipes Causing Leakage Of Brake Fluid.
Weakening Of The Fuel Tank Structure Can Occur Resulting In Fuel Tank Leaks.
Cracks May Appear In The Fuel Line Flexible Connectors.
Retaining Clip Could Become Loose Allowing The Link Bolt To Fall Out Leading To Loss Of Brake Application.
Retaining Clip Could Become Loose Allowing The Link Bolt To Fall Out Leading To Loss Of Brake Application.
Fitted With An Incorrect Spring Brake Control Valve.
Component Gaskets Do Not Comply Resulting In Lp Gas Leak From The Lpg Cylinder.
Hose Material May Deteriorate & Allow Fuel Leakages Which May Ignite On The Hot Exhaust System And Start A Fire.
Thermal Radiation From Catalyst Can Develop With Existing Heat Shield, An Underbody Fire May Break Out.
Engine Oil Cooler Pipe May Come Into Contact With Hydraulic Brake Pipe.
Throttle Cable In Contact With The Brake Pipe Leading To The Proportioning Valve.
Possibility Of Hydraulic Fluid Leakage Resulting In A Loss Of Power Assistance In Braking System.
Vans May Have Sustained Slight Damage To The Fuel Tanks During The Installation Of Fixtures And Fittings.
Rear Brake Line Assembly Could Develop A Fatigue Fracture Leading To Loss Of Brake Fluid & Braking Capability.
The Steel Ball Internally In The Tank May Become Stuck Causing Inner Pressure Of The Fuel Tank To Build Up.
Brake Fluid Leak May Occur Causing Loss Of Brake Efficiency.
Brake Fluid Leak May Occur From One Circuit Of Proportioning Valve Causing Loss Of Brake Efficiency.
Fluid Bypassing The Seal Causing Failure To One Circuit Of The Tandem Braking System Reducing Braking Efficiency.
Retention Of The Circlip On The Brake Pedal Pivot Shaft Causing Possible Dislodgement Of Shaft.
Reduced Braking Effectiveness Under Certain Circumstances.