Every published safety recall for Harley Davidson vehicles in Australia, sourced directly from the government register.
Due to a supplier manufacturing issue, the crankcase ventilation system may have a blocked breather port. This can result in excessive build up pressure in the crankcase, posing a…
The brake line may chafe against the Body Control Module (BCM) which may lead to a hole in the brake line overtime. If this occurs it could lead to a brake fluid leak resulting in…
Under certain driving conditions the upper triple clamp that secures the handlebar may fracture. This could lead to a loss of vehicle control whilst riding.
Due to a manufacturing issue, under certain driving conditions the upper triple clamp that secures the handlebar may fracture. This could lead to a loss of vehicle control whilst r…
Due to a manufacturing issue, the rear shock absorber adjuster mounting tab may fracture. As a result, the shock absorber adjuster could loosen and contact the rear tyre causing a…
Due to a manufacturing variation, the regulator output wiring harness may chafe against the crankcase exterior and become damaged. As a result, the vehicle may experience loss of…
Due to a manufacturing issue, affected motorcycles may lose stability whilst operating under certain conditions at higher speeds. This could result in a loss of vehicle control.
Due to a manufacturing issue, the lower frame rail clamp may not have been adequately secured to the rear brake line allowing the line to contact the exhaust. If this occurs, the b…
Due to a manufacturing issue, the rear shock absorber adjuster mounting bolt may break. As a result, the shock absorber adjuster could loosen and contact the rear tyre causing a lo…
Due to a software issue, the brake light may remain illuminated when the brakes are not applied. If this occurs, the traffic behind the vehicle will be unable to identify if the mo…