8 safety recalls published for the Holden Jackaroo (1996–2000).
Poor earthing connection within the main engine wiring harness.
The throttle cable seal may deteriorate over time, and stick to the inner cable. If the seal sticks to the inner cable, it is possible that the engine speed may not reduce when th…
The injector sleeve sealing (O-rings) material can deteriorate and cause fuel to leak into the crankcase. This may result in an unintentional increase in engine speed, and possibl…
May Experience A Malfunction Of The Vacuum Pump Check Valve Which Could Cause Insufficient Vacuum To Be Supplied To The Braking System Resulting In Poor Brake Performance With Incr…
May Experience Water Intrusion Into The Tdc Sensor Resulting In Poor Conductivity And Corrosion Causing The Engine To Stall, Prove Difficult To Start Or In Some Cases May Not Start…
The Front Left Hand Brake Pipe May Not Have Been Correctly Fitted Resulting In Decreased Clearance Between Brake Pipe And Upper Control Arm Of The Suspension.
May Not Have Had The Front Hub Lock Washers And Screws Correctly Fitted Resulting In Worst Case, Bearing Seizing.
The Tongue Retaining Bolt Is Only Torqued Finger Tight - Possible To Install The Tow Bar Assembly To A Vehicle Without Applying The Torque To The Retaining Bolt.