11 safety recalls published for the Holden Barina (2011–2014).
Certain vehicles may have been fitted with an incorrectly sized fuel pump O-ring seal during a service operation.
The clutch pedal adjustment may be too high. This condition will apply excessive stress to the pedal which may result in a fracture after prolonged use.
The transmission mount on a small number of these vehicles may develop a fracture.
The bolts connecting the front lower control arms to the steering knuckles may not have been fastened to specification. Under certain driving conditions it is possible that the low…
Holden has identified a condition where, potentially the Brake/Stop lamps may illuminate for a short period of time without the brake pedal being depressed.
The vehicle may suffer reduced brake performance and/or a spongy low brake pedal due to a sticky valve within the Electronic Brake Control Module (EBCM).
The vehicle may suffer reduced brake performance and/or a spongy low brake pedal due to a sticky valve within the Electronic Brake Control Module (EBCM).
The seat rail locking mechanism fitted to the front seats may fail to lock and cause the seat to move forwards or backwards unexpectedly.
Due to material fatigue of the front seat belt buckle anchor plate on the inner seat rail runner, there is a potential risk the front seat belt buckle anchor plate may detach from…
As a result of fatigue and under specific load conditions, the locking spring of the front seat belt buckle mechanism may weaken which can potentially release the seat belt buckle…
Abrasion Of Fuel Hose May Result In Fuel Leak In Swift 1.3 Ga,gl & Gc, Barina Mb & Ml Manuf. April '84 To January '87.