9 safety recalls published for the Isuzu N-Series (2004–2021).
Due to a manufacturing issue with a hose in the automatic transmission, fluid may leak from the transmission which could result in a loss of motive power.
The rear axle suspension U-Bolts may not have been tightened sufficiently and may separate from the suspension.
The driving light switch receives power when the lights are on, when it should only receive power when the lights are on high beam.This means that the driving lights may be on when…
During the fitting of the tow ball, the securing nut may have had insufficient torque applied. This could cause the securing nut to come loose. In the worst case, the tow ball co…
The horn may fail to operate due to the mis-routing of the electrical harness inside the steering wheel pad.
The eye bolt securing the oil pipe to the vacuum pump was not tightened to the correct torque during production.
During the initial charging of the CNG fuel tank, by lowering the temperature of the gas, cracks developed in the soluble alloy of the safety valve. Subsequent charging of the fuel…
Some of the vehicles may have received a propeller shaft with insufficient high frequency heat treatment. Due to inadequate high frequency heat treatment on the base of the propell…
The fault relates to a possible diesel fuel seep or leak from the linkage pipe at the upper or lower fuel port on the diesel fuel supply pump.