9 safety recalls published for the Mercedes-Benz Sprinter 906.
During manufacture incorrect headlights (left hand drive version) may have been fitted to the vehicle.
During production it is possible that the seat belt anchor bolts at the B pillar and seat base may have received an incorrect torque setting. In the case of an incorrectly tensione…
The fleece filter insert in the oil separator of the engine breather system could become blocked with residues over time and cause the crankcase to become pressurised. Should this…
The previous software upgrade for the engine control unit may not fully overcome the possibility of piston damage occurring as a result of a less than ideal combustion process. If…
1. In certain vehicles piston damage may occur as a result of a less than ideal combustion process. If the vehicle continues to be driven in this condition engine oil may be ejecte…
Due to irregularities in the axle hardening process it is possible micro-fissures may develop in the axle which could lead to eventual failure and loss of drive power.
Vans may have been incorrectly fitted with spring leaves on the rear axle which are 1mm too thick, which could cause the spring to break unexpectedly. Should this occur, and depen…
Certain vehicles which visited an authorised Mercedes-Benz workshop between 15-17 April 2008 and 5-10 June 2008 may have received a partially incorrect software update affecting so…
During production of the cable an oversize end lug may have been used which could lead to the positive starter cable separating from the end lug.