Every safety recall published by the Australian government, searchable and filterable.
Inspection and/or replacement of the oil cooler to ensure that correct oil cooling unit has been fitted to the motorcycle. This inspection is indispensable, as, if the oil cooler…
There is a possibility that the force which is applied to the tailgate gas strut stopper may, through continued opening of the tailgate, cause fatigue damage to the tailgate gas st…
There is a possibility that the force which is applied to the tailgate gas strut stopper may, through continued opening of the tailgate, cause fatigue damage to the tailgate gas st…
Single sensing seatbelts (vehicle decceleration only) fitted to the retractor seatbelts. The ADR requires webbing acceleration (W) sensing also.
The modification is designed to eliminate any risk of a short circuit in the electrical system in the case where the battery negative cable has rubbed on the air conditioning pipin…
The power steering oil pump may fail to function properly, resulting in an increase in effort required to steer the vehicles, under some use conditions internal parts of the pump m…
A defect exists due to the possible loss of fuel pressure failure to the engine fuel system. Due to high ambient temperature and severe driving condition concluding in vibration,…
The defect relates to the seat belt retractors. It has been found that these retractors do not satisfactorily operate as either an ELR or ALALR. Retractors can be identified by the…
The possibility exists for the plastic casing of the cruise control actuator cable to break, which then may cause the cable to bind and prevent the throttle linkage/valve from retu…
The possibility exists for either of the front indicator lamps to malfunction at times.
Possible problem if retaining bolts on the front brake stay arm of the Motobella XSJ50 are over tensioned it is possible that the ends of the internal bushes on the front brake sta…
There is a possibility that the left hand brake tube may contact the shock absorber while driving and the brake pipe could be damaged.
Possibility exists for fuel tank to melt or deform as a result of radiant exhaust heat, due to insufficient clearance between exhaust pipe and fuel tank.
Possibility exists for fuel tank to melt or deform as a result of radiant exhaust heat, due to insufficient clearance between exhaust pipe and fuel tank.
The electric power supply cable to the starter motor can come into contact with an oil cooler pipe (which could, in time, cause degradation of the insulation on the starter cable).
The tail lamp bulb could become loose in its socket and thus render tail lamp and brake lights inoperative.
The jacks in question did not have a mandatory safety label affixed to the body of the jack. The jacks also do not comply with the overload and durability sections of the vehicle j…
There is the possibility that inappropriate servicing of the steering rack retaining hardware may affect the integrity of the steering rack mounting stud. Overtightening of the st…
Failure of the electrics due to rubbing on the frame rail.
U-bolts can break due to a torque drop (front axle) or a high material hardness (rear axle).
A defect exists due to the possible failure of the dimmer control for the instrument panel lights (a transistor in the vehicles multiplex control unit).
An oil leak may develop due to removal and incorrect reinstallation of an oil cooler hose. The cooler hose may have been removed and reinstalled in the process of installing an ad…
These model vehicles are fitted with seatbelts which do not meet the requirements of ADR 4/03 that they are not dual sensitive but in actual fact single sensitive. Seatbelt models…
Single sensing seatbelts (vehicle deceleration V only) fitted to the retractor seatbelts. The ADR requires webbing acceleration (W) sensing also.
The front propeller shaft guard may be incorrectly positioned and therefore does not comply.