Every safety recall published by the Australian government, searchable and filterable.
There is a risk that the left-hand front anti-roll bar linkage may come into contact with the brake pipe.
The fault relates to the Electronic Control Unit (ECU) that controls the deployment of the air bags and seat belt pretensioners. Under high humidity conditions, it is possible for…
Tie rod end bearing manufactured with possible below specification hardness characteristic.
Bendix hand brake control valve may have faulty internal casting that restricts air flow.
The lower bush in the handle of the park brake valve is missing on certain valves. As a result, it is possible to turn the handle through 45 degree while less force is needed to l…
The Parking Pawl mechanism may fail to restrain the vehicle when parked if the handbrake is not correctly applied. If an affected vehicle is restrained in a parking situation by t…
Due to static electricity discharge, the side airbags may inadvertently deploy when a person is alighting either the passenger or drivers side front seats.
Rear Luggage Rack Kits may have been released into the market with incorrect specification locknuts, which could cause the luggage racks to become loose and possibly cause vehicle…
Floor mounting leg of the coach seats may partially tear in a crash.
Faulty software within the Electronic Control Unit for the transmission may activate reverse gear when travelling below 3km/h.
There is a possibility that the Side Support Stand may have a safety defect that could cause them to bend or break without notice, thereby allowing the motorcycle to fall and pote…
It is possible that debris and leaf litter may accumulate around the engine intake and exhaust manifold. This could result in an underhood fire.
The pressure pipe to the fuel injectors could leak.
A brake lamp switch malfunction may develop rendering the brake lamps inoperative.
The front suspension may in severe conditions contact and damage the fuel tank resulting in a fuel tank leak.
Dana Australia has advised that the inner CV joints of the IRS half shafts fitted to certain BA 16 sedan models may have been assembled without a retaining circlip. This may allow…
After extended use it is possible that the fuel rail crossover tube O-ring seals may leak. This could result in an underhood fire.
The flange on the transmission output shaft may fail due to fatigue.
The front high pressure fuel line could fail through stress fatigue.
May have been provided with a tyre placard bearing an incorrect tyre designation.
The steering system pinch bolts that secure the steering shaft from the steering gear to the L/H mitre box and the steering cross shaft located between both left and right mitre bo…
Cracking on the clamp area of the lower triple clamp.
Affected vehicles require the TCU (Transmission Control Unit) recalibrated. The Automatic Shift Manual transmission fitted to the vehicles may change to a lower gear unexpectedly.
Possibility of premature wear on the right hand side rear wheel bearings, which in turn could cause the bearing to seize.
Due to improper welding of the connection for the diffuser and the gas generator in the passenger side airbag inflater, the diffuser can detach from the connection when the airbag…