Every safety recall published by the Australian government, searchable and filterable.
Due to a programming issue, the fail-safe driving mode which helps reduce the effects of failure in the vehicle may activate unintentionally resulting in a loss of motive power.
Due to a manufacturing defect, the front drive shaft may become damaged and break. If this occurs, it could lead to a sudden loss of motive power.
The lower resin bumper cover may detach if damaged during vehicle operation.
Due to a manufacturing issue, the V-stay connection screws in the rear suspension may become loose causing the rear axle housing to move sideways. If this occurs, there is a risk o…
Due to a manufacturing defect the 12 Volt alternator wiring harness may come in contact with the transmission drive shaft. As a result, the wiring harness could become damaged caus…
Due to a defect during assembly, the lock nut securing the steering draglink to the pitman arm may not have been tightened sufficiently and could become loose. If this occurs, the…
Due to a manufacturing issue, the headlamps may not be adjusted correctly. This could cause an incorrect headlamp range function of the vehicle.
Due to a manufacturing issue, the electric parking brake wiring harness may contact and chafe against the rear axle housing. If this occurs, it could lead to an unintentional parki…
The bolts connecting the variable camshaft timing unit to the engine may break. This may activate the limp home mode safety feature and potentially cause the engine warning light t…
Due to a manufacturing issue, the mounting screws on the left-hand side front bumper reinforcement bracket may not have been tightened sufficiently. As a result, the pedestrian de…
Due to a software issue, some vehicles may experience a thermal overload. If this occurs, vehicle occupants may identify smoke or fire emanating from underneath the vehicle.
The rear-view camera may not display the rear-view image whilst reversing as intended.
Due to a software issue, the Powertrain Control Module (PCM) may not activate as intended. As a result, the internal combustion engine will not start when required resulting in a r…
The internal components of the fuel pump may wear and fracture the welded area of the fuel pump, which could lead to a fuel leak in the engine compartment.If this was to occur, veh…
Due to a manufacturing issue, the CGW (Central Gate Way) control unit attached to the rear of the blower for the air conditioning in the passenger compartment may corrode due to mo…
Due to improper programming of the vehicle’s trailer connection electrical control unit. The hazard lamps, reverse lamps and backup alarm may activate when the lamps are not activa…
Due to a software issue, the electric vehicle (EV) Drivetrain system may deactivate resulting in a loss of motive power.
Due to a manufacturing defect, the steering wheel earth wire may become loose. If this occurs, the driving assist functions such as hands-off the steering wheel warning or emergenc…
Due to a manufacturing issue, the lower frame rail clamp may not have been adequately secured to the rear brake line allowing the line to contact the exhaust. If this occurs, the b…
Due to a manufacturing defect, the front axle brake line hose(s) may become dislodged from the end fitting crimp. This may cause a reduction in braking performance or an unintended…
The driver side airbag wiring harness connection may become loose over time. As a result, the airbag warning light will illuminate and the driver side airbag will not deploy.
During an accident with high side impact forces, the glass display screen may shatter propelling glass fragments inside the cockpit.
Due to a manufacturing issue, the V-stay connection screws in the rear wheel suspension may become loose, causing the rear axle housing to move sideways. If this occurs, there is a…
Due to a manufacturing issue, the front passenger airbag inflator may catch on the dash panel and rupture in the event of airbag deployment.
The connection depth of the front towing point may not meet manufacturing specifications. As a result, the front tow point connection could detach from the vehicle during frontal t…