Every safety recall published by the Australian government, searchable and filterable.
On some V240 vehicles, there may be a manufacturing defect in the handbrake assembly that could cause the handbrake to disengage.
"A combination of unfavourable tolerances can mean that the brake lines installed on some motorcycles with BMW Motorrad Integral ABS generation II might be under strain. The vibrat…
Brake lines installed on the affected motorcycles might be installed under strain. The vibrations that occur when the motorcycle is being ridden could cause the brake lines to deve…
Due to improper mounting position of the Rear Brake Light Switch assembly, the temperature of the switch assembly may be increased by heat from catalytic converter. Therefore, if t…
Early wear on the belt tensionser.
If the front seats are adjusted very far, resulting in unfavorable tolerances, it is possible that the function of the locking mechanism for the seat belt mount can no longer be gu…
The brake booster check valve may develop a vacuum leak.
Audi AG, having learned that on their QF Model vehicles manufactured within a defined period there is the possibility that, in the event of an accident resulting in the deployment…
Chrysler has decided that a defect which relates to motor vehicle safety, exists in some 2001 through 2004 model year Jeep Grand Cherokee vehicles that had Safety Recall F17 perfor…
A very small quantity of steering wheels fitted to Transit vehicles may have a defect with the casting of the steering wheel hub assembly
Due to the design of the bracket, the LED controller may come in contact with the oil filter. Over time, this contact can lead to a hole in the oil filter and a possible oil leak.…
In some instances the lubrication to the supply pump drive bearing may be insufficient.
Fuel leakage from fuel line at the injector end
The design of the handrails of the tankers do not comply with the Australian Standard 1657-1992 (Fixed platforms, walkways stairways and ladders - Design, construction and installa…
The stop light relay may remain closed causing the brake lights to remain on.
In some cases the gas bottle storage box may not be sealed.
In some cases a gas cock has not been fitted to the gas line leading to the BBQ.
The welded portion of the lower rear shock mount may crack from vibration and impacts generated from bumps while riding.
Reports of frame cracking and/or breakage behind and below the steering head tube.
There is the potential for the Accumulator fitted to the Hydraulic Brake Booster (HBB) to lose pressure.
If a passenger on an affected bus places their hand on the entrance door partition when the passenger entrance door is operating, there is a possibility their hand may be caught be…
The coolant hose clamp fitted to the coolant pump outlet may break due to engine vibration.
On eligible units there is a possibility that the engine mount adjusting collars may have been over-tightened, creating excessive stress on the lower rear frame welds which under c…
In the event of an accident in which the seat belt tensioners are triggered, the rear side pillar trim can come loose at the front mounting. The trim would then move into the pass…
Malfunction.