Every published safety recall for Hino vehicles in Australia, sourced directly from the government register.
In the affected models, due to variations in wiring harness routing, there is a possibility that the wiring harness insulation may wear due to contact with the engine and chassis.
Due to a manufacturing defect, the spare tyre carrier connection bolts may not have been fastened with sufficient torque and could become loose. As a result, the spare tyre and car…
Due to a manufacturing defect, the tailgate cylinder pivot pin may break. If this occurs, it can result in the tailgate door dropping to a vertical position.
Due to a manufacturing defect, the tailgate cylinder pivot pin may break. If this occurs, it can result in the tailgate door dropping to a vertical position.
Due to a manufacturing defect, the propeller shaft to the first rear axle may have not been welded to the required specifications. As a result, it could cause the propeller shaft t…
Due to a manufacturing defect, the chassis wiring harness may come in contact with the engine side cover, engine side cover bracket or cabin arch. As a result, the wiring could bec…
Due to a software defect, a warning message that indicates when the Automatic Clutch Unit (ACU) motors require replacement may not operate as intended. This may cause the ACU to st…
Due to a manufacturing defect, there is a possibility that the wiring harness retaining bracket on the front drive (R1) axle housing may interfere with the suspension lateral rod i…
The starter Emergency Control Switches enables the vehicle to be started whilst in gear. In the event of an Automated Manual Transmission (AMT) malfunction, using these switches wh…
The starter Emergency Control Switches enables the vehicle to be started whilst in gear. In the event of an Automated Manual Transmission (AMT) malfunction, using these switches wh…