10 safety recalls published for the Jeep Wrangler (2006–2020).
The transmission harness may have insufficient clearance to the catalytic converter.
The transmission harness may have insufficient clearance to the catalytic converter.
If the powertain control module fails, the driver may experience a no-start, a start-and-immediate stall condition, or an engine stall while driving.
Water may travel along the heated power mirror wiring harness and into the heated power mirror electrical connector. This can cause corrosion inside the heated mirror connector and…
The transmission skid plate on the 2010 JK Jeep Wrangler may allow debris to collect around the catalytic converter.
The select suspension fasteners on your vehicle may not have been tightened properly and under certain driving conditions may become loose.
The front fender liners on the vehicle may detach or sag allowing the fender liner to contact one or more of the brake tubes.
Investigations have shown that some vehicles may have insufficient clearance between the steering intermediate shaft and the rear brake tubes. Prolonged brake tube contact could we…
The clutch pedal pushrod on a number of vehicles may break and allow clutch engagement when the pedal is depressed. This can increase the vehicle's stopping distance and/or cause e…
An electrical short circuit may result if water or impurities enter the ignition switch.