Every published safety recall for Mitsubishi Fuso vehicles in Australia, sourced directly from the government register.
During production there may have been insufficient torque settings applied to the bolts fixing the ring gear for the differential.
During production a machining error on the clutch drum has led to the possiblity that a snap ring could displace. This may lead to transmission clutch slippage and result in the ve…
The thread of the hub drum fixing nuts may not meet specifications. As a result, the hub drum fixing nuts may not tension correctly.
Due to insufficient tensioning of the steering bevel lock-nut on affected trucks within the VIN range, there is the possibility that the lock-nut may loosen.
Due to the improper location of the ABS hydraulic unit ground wiring harness on affected trucks, water may infiltrate resulting in corrosion within the wiring connector.
Due to the possibility of interference between the power steering box worm shaft oil holes and oil seal on affected trucks, the oil seal may fail.
As a result of propeller shaft imbalance, it is possible a crack could develop in the propeller shaft centre bearing rest. If the vehicle continues to be driven in this condition t…
Due to a manufacturing error within the fuel injection pump it is possible that engine oil and fuel could become mixed and find its way into the engine.Should this occur an unexpec…
Due to a manufacturing error within the fuel injection pump it is possible that engine oil and fuel could become mixed and find its way into the engine.Should this occur an unexpec…
Due to the improper location of an instrument panel wiring harness connector on affected trucks, condensed water from the air conditioning system may infiltrate the connector.