Every published safety recall for Skoda vehicles in Australia, sourced directly from the government register.
Due to a manufacturing defect, the inner frame edge of the front seats may have been produced with improperly finished surfaces. As a result, the frame edge could damage the side a…
Due to a manufacturing issue, the heat shield between the brake master cylinder and the exhaust may have been incorrectly fitted. As a result, a connection to the brake fluid reser…
Due to a manufacturing issue, the front passenger airbag inflator may catch on the dash panel and rupture in the event of airbag deployment.
Due to manufacturing issue, the engine compartment cover may become loose. If this occurs the engine cover may move and touch the turbocharger resulting in smouldering damage or an…
Due to a manufacturing issue with the welding of the rear middle backrest frame there may be a reduction in the performance of the attached seat belt.
The front turn signal may fail and the failure may not be detected, resulting in no warning lights or sounds being activated.
Due to a production fault, over time a crack in the transmissions pressure accumulator can occur.
In some instances, there is a risk that one or several fixing nuts may be missing from the individual rear passenger seat.
In some instances, the front driver air bag may not inflate to its fullest capacity fast enough when required.
The gas generator of some front seat belt tensioners may have been incorrectly crimped onto the actuator pipe of the belt tensioner.