Every safety recall published by the Australian government, searchable and filterable.
Due to a manufacturing defect, insufficient sealing of the reverser system control unit may allow moisture to enter into the unit. If this occurs, it could cause a short circuit le…
Due to a manufacturing issue, the front axle brake hoses may deteriorate over time. If this occurs, it could lead to a brake fluid leak resulting in reduced braking performance.
The Hydraulic Electronic Control Unit (HECU), responsible for the Anti-lock Braking System, Electronic Stability Control System and Traction Control System, can remain live even wh…
The Hydraulic Electronic Control Unit (HECU), responsible for the Anti-lock Braking System, Electronic Stability Control System and Traction Control System, can remain live even wh…
The Hydraulic Electronic Control Unit (HECU), responsible for the Anti-lock Braking System, Electronic Stability Control System and Traction Control System, can remain live even wh…
The Hydraulic Electronic Control Unit (HECU), responsible for the Anti-lock Braking System, Electronic Stability Control System and Traction Control System, can remain live even wh…
The Hydraulic Electronic Control Unit (HECU), responsible for the Anti-lock Braking System, Electronic Stability Control System and Traction Control System, can remain live even wh…
The Hydraulic Electronic Control Unit (HECU), responsible for the Anti-lock Braking System, Electronic Stability Control System and Traction Control System, can remain live even wh…
The Hydraulic Electronic Control Unit (HECU), responsible for the Anti-lock Braking System, Electronic Stability Control System and Traction Control System, can remain live even wh…
The Hydraulic Electronic Control Unit (HECU), responsible for the Anti-lock Braking System, Electronic Stability Control System and Traction Control System, can remain live even wh…
The Hydraulic Electronic Control Unit (HECU), responsible for the Anti-lock Braking System, Electronic Stability Control System and Traction Control System, can remain live even wh…
The Hydraulic Electronic Control Unit (HECU), responsible for the Anti-lock Braking System, Electronic Stability Control System and Traction Control System, can remain live even wh…
Due to a manufacturing defect, the main wiring harness may come in contact with the steering column shaft and become damaged. This may result in the loss of power assisted steering…
The vehicle specification sheet obtained from the LDV website may have provided incorrect information in relation to gross vehicle mass, axle capacities, payload and towing capacit…
Due to a manufacturing defect, a component of the brake booster system may have been incorrectly welded and could break. If this occurs, a higher pedal force will be required and t…
Due to a manufacturing defect, a component of the brake booster system may have been incorrectly welded and could break. If this occurs, a higher pedal force will be required and t…
Due to a manufacturing defect, the front passenger seat mounting bolts may not have been tightened according to specifications and could become loose or detach. As a result, the s…
Due to a manufacturing defect, oil cooler lines could burst resulting in a sudden loss of oil pressure. This could lead to the engine stalling or an oil leak. An oil leak in the pr…
Due to a manufacturing defect, the Steering Column Control Module (SCCM) may have not been welded to the required specifications. As a result, the SCCM could fail to send an airbag…
Due to a manufacturing defect, the front passenger seat mounting bolts may not have been tightened according to specifications and could become loose or detach. As a result, the s…
The circuit design inside the relay is configured incorrectly. Therefore, the flashing cycle of the turning signal will not comply with the Australian Design Rules (ADR).
Due to a software issue with the Electronic Brake Control Module (EBCM), the brake fluid warning light may not illuminate as intended and therefore fail to warn the driver when the…
Due to an assembly defect, the vehicle number plate may be positioned above the maximum height set under Australian Design Rule (ADR).
The manual release cable of the bonnet latch may have excessive tension which potentially may cause the latch to open. If this occurs, the bonnet could open unexpectedly whilst the…
The high-voltage battery management software has insufficient protections for short circuit events. As a result, if a short circuit occurs it could lead to a vehicle fire whilst dr…