Every safety recall published by the Australian government, searchable and filterable.
The rear suspension may not meet manufacturing specifications and could buckle. If this occurs, there is a risk of contact between the rear tyre and the chassis, the main wiring ha…
Due to a manufacturing issue, the airbag wiring harness under the rear passenger seat may not have been adequately secured. As a result, it may become damaged over time due to seat…
Due to a manufacturing defect, moisture may enter the front and rear wheel speed sensors. If the sensors are exposed to moisture ingress:• the speedometer may not display as intend…
The jack provided with the vehicle may not include a base plate. The jack does not comply with the mandatory standard for vehicle jacks Consumer Protection Notice No. 1 of 2010 Con…
Due to a manufacturing defect, the Steering Column Control Module (SCCM) may have not been welded to the required specifications. As a result, the SCCM could fail to send an airbag…
Due to a manufacturing defect, the Steering Column Control Module (SCCM) may have not been welded to the required specifications. As a result, the SCCM could fail to send an airbag…
Due to a manufacturing defect, the sealing of the starter motor may be insufficient allowing moisture to enter into the unit. If this occurs, it could cause a short circuit leading…
Due to a manufacturing defect, the sealing of the starter motor may be insufficient allowing moisture to enter into the unit. If this occurs, it could cause a short circuit leading…
Due to a manufacturing defect, signal interference may occur within the electronics of the brake system. If this occurs, a higher pedal force may be required for braking. The anti-…
Due to a manufacturing defect, liquid may enter the electrical water pump connectors. This could cause an electrical short circuit leading to a vehicle fire.
The fuel hose may have been installed incorrectly and may come into contact with the engine oil level dipstick mounting bracket. As a result, fuel may leak from the damaged hose, a…
Due to a manufacturing defect, signal interference may occur within the electronics of the brake system. If the fault occurs, a higher pedal force may be required for braking. The…
Due to a manufacturing defect, the fuel delivery pipe may become damaged due to contact with the engine wiring harness. As a result, fuel may leak in the presence of an external ig…
The starter motor relay plastic cover may have been damaged during production, allowing moisture to enter into the Printed Circuit Board (PCB). As a result, the rider may be unable…
The attachment for the interior cargo rail may become damaged in the event of an extreme rear impact. This could result in the interior cargo rail detaching from the vehicle.
Due to a manufacturing defect, the fuel pump impeller may become deformed under certain environmental conditions, interrupting the fuel supply. If this occurs, the engine could sta…
Due to a manufacturing defect in the Engine Control Module (ECM), the fuel pump control valve may remain ‘open’ and fuel supply may be interrupted. If this occurs, the engine could…
The fuel delivery hose may have been installed incorrectly and come into contact with the engine oil level gauge bracket resulting in premature wear. Fuel may leak from a damaged h…
Due to a software issue, the Engine Control Module (ECM) may incorrectly reduce the engine speed. If this occurs, the engine may stall, resulting in a loss of motive power.
Due to a manufacturing defect, the chassis wiring harness may come in contact with the engine side cover, engine side cover bracket or cabin arch. As a result, the wiring could bec…
Due to a manufacturing issue, the ignition coil high tension cord may become damaged over time. If exposed to water ingress it could cause the vehicle speed sensor and the throttle…
The left-hand turbocharger oil feed pipe and hose assembly may deteriorate due to heat from the exhaust manifold. If this occurs, oil could leak into the engine bay and accumulate…
Due to a software issue in the transmission control module, if the brake pedal is firmly depressed to stop the vehicle the clutch for the engine and electric motor may remain disen…
The left-hand turbocharger oil feed pipe and hose assembly may deteriorate due to heat from the exhaust manifold. If this occurs, oil could leak into the engine bay and contact hot…
Due to a manufacturing defect, wiring harness earth connection bolts may not have been fastened with sufficient torque. This may increase the electrical resistance of the wiring ha…