Every safety recall published by the Australian government, searchable and filterable.
Pedal Springs May Fail Causing Pedal To Go To Full Throttl Resulting In Loss Of Control Of The Vehicle.
When The Cruise Control System Becomes Wet It May Short Circuit Causing The Motorcylce To Automatically Increase Speed.
Wire Forms On Motorcycle May Chafe On Battery Causing A Short Circuit.
Base Of Seat May Be Insecure Due To Construction Problems.
Pedal Springs May Fail Causing Pedal To Go To Full Throttle Resulting In Loss Of Control Of The Vehicle.
Pedal Springs May Fail Causing Pedal To Go To Full Throttle Resulting In Loss Of Control Of The Vehicle.
Gear Selector Switch May Become Overloaded And Switch May Overheat And Fail.
Throttle-kickdown Cable May Chafe Against Brake-pipes Causing Leakage Of Brake Fluid.
Return Hose May Become Detached Resulting In Loss Of Power To Steering.
Return Hose May Become Detached Resulting In Loss Of Power Assistance To The Steering.
Weakening Of The Fuel Tank Structure Can Occur Resulting In Fuel Tank Leaks.
Cracks May Appear In The Fuel Line Flexible Connectors.
Shaft That Transmits Steering Movement Has Possibly Not Been Completely Welded.
Air Cleaner Baffle May Dislodge, Rest On Cleaner Element, Be Drawn Into Air Intake System And Lodge In The Throttle.
Air Cleaner Baffle May Dislodge, Rest On Cleaner Element, And May Lodge In The Throttle Body.
Retaining Clip Could Become Loose Allowing The Link Bolt To Fall Out Leading To Loss Of Brake Application.
Retaining Clip Could Become Loose Allowing The Link Bolt To Fall Out Leading To Loss Of Brake Application.
Rear Bogie Suspension Spring Leaf May Fail Leading To A Possible Reduction In Directional Control Of The Vehicle.
Fitted With An Incorrect Spring Brake Control Valve.
Cracking In Front Panhard Rod Bracket Attachment Welds May Result In Reduced Steering Stability.
Cracking In Front Panhard Bracket Attachment Welds May Result In Reduced Steering Stability.
Part Of The Bonnet Secondary Catch Fixture Was Omitted From Assembly - Bonnet May Lift While Vehicle Is In Motion.
Part Of The Bonnet Secondary Catch Fixture Was Omitted From Assembly - Bonnet May Lift While Vehicle Is In Motion.
Incorrectly Assembled.
Incorrect Compliance Plate And Identification Plate And Relevant Park Brake Specification Change Required.