Every safety recall published by the Australian government, searchable and filterable.
Due to a software issue in the transmission control module, the transmission may not downshift under certain conditions and could result in a sudden loss of engine power.
Due to a manufacturing defect, vehicle management systems connected to the fuse box may fail. If this occurs, it may lead to a sudden loss of motive power and/or a vehicle fire.
Due to manufacturing defect, the engine turbocharger oil delivery pipe may not have been sufficiently tightened. As a result, the pipe may become loose over time and could lead to…
Due to a manufacturing defect, the right-hand side lower A-pillar frame mounting bolt may have not been tightened according to specifications. As a result, this may lead to a reduc…
The power distribution module wiring harness may have been connected incorrectly to the positive and negative fuse and relay box terminals. As a result, a mounting bracket could in…
The clamps retaining the engine’s fuel injectors may not meet manufacturing specifications and could crack. If this occurs, fuel may leak in the presence of an external ignition so…
Due to a software issue in the steering column control module, vehicles may have been built with a steering column control module (SCCM) turn signal lever which may not cancel when…
Due to a manufacturing defect, the threaded cap fitted to the front suspension fork may strip and detach from the outer tube. This could cause the front suspension to become instab…
Due to a manufacturing defect, signal interference may occur within the electronics of the brake system. If this occurs, a higher pedal force may be required for braking.The anti-l…
Due to a design issue, the transmission control module may not operate as intended. If this occurs, the automatic transmission may continue to transfer engine power to the wheels w…
Due to a design issue, the transmission control module may not operate as intended. If this occurs, the automatic transmission may continue to transfer engine power to the wheels w…
Due to a manufacturing defect, the fuel tank may have been incorrectly welded. This could cause a fuel leak and result in a vehicle fire.
Due to a software issue in the steering column control module, vehicles may have been built with a steering column control module (SCCM) turn signal lever which may not cancel when…
Due to a software issue, the engine control software requires updating for efficient engine emission performance.
Due to a manufacturing defect, the diesel particulate matter sensor may not have been installed during assembly. This could increase vehicle emissions and block the diesel particul…
Due to a manufacturing issue, the heat shield between the brake master cylinder and the exhaust may have been incorrectly fitted. As a result, a connection to the brake fluid reser…
Due to a manufacturing issue, the heat shield between the brake master cylinder and the exhaust may have been incorrectly fitted. As a result, a connection to the brake fluid reser…
Due to a manufacturing defect, the fuel pump impeller may not operate as intended. If this occurs, it could impair the fuel supply to the engine and result in a loss of power whils…
Due to a manufacturing defect, the fuel pump impeller may not operate as intended. If this occurs, it could impair the fuel supply to the engine and result in a loss of power whils…
The location of the rear side reflectors fitted to the affected trailers does not meet the requirements of Australian Design Rule 13/00 (ADR 13/00).
Due to a manufacturing defect, the gear set within the power steering assembly may have been installed incorrectly resulting in a loss of steering control.
This recall is a re-notification for REC-005700.Due to an incorrect service diagnostic tool and software update, the affected vehicles remain with the safety defect. As a result, v…
Due to a manufacturing defect, the front passenger airbag may not have been installed correctly.
The engine support mounting bolts may not have been tightened to the correct torque potentially causing them to become loose and detach. If this occurs, the bolt will obstruct the…
A manufacturing defect in the vehicle’s air system may experience a delay in charging the front brake circuit. This could result in a loss of braking performance of the front brake…