Every safety recall published by the Australian government, searchable and filterable.
In certain conditions vehicles may experience the turbo boost increasing faster than the enrichment of the air/fuel ratio, which may result in Malfunction Indicator Light (MIL) ill…
Improper machining of the transfer case cover may result in oil seal displacement, allowing transmission fluid (ATF) to escape.
Owners’ Manuals supplied in the vehicle do not contain some specific information required for Australia, such as Child Restraint Loading precautions.
Holden has identified a condition where the LPG excess flow valve may restrict fuel supply to the engine resulting in reduced engine performance.
The front suspension wishbone fixing bolts may not be to the correct specification.
Due to insufficient clamping force, the automatic transmission fluid (ATF) hoses fitted to the Duonic transmissions of affected vehicles may separate at the clamps to the steel pip…
The driven gear in the wiper motor may fail due to incorrect grease application.
The bolted connection on the housing of the variable valve timing unit (VANOS) adjustment units may become loose. As a result the units may develop an internal oil leak and then no…
The bolted connection on the housing of the variable valve timing unit (VANOS) adjustment units may become loose. As a result the units may develop an internal oil leak and then no…
Harley-Davidson Motor Company, lnc. has determined that some of these motorcycles may have been assembled with a front brake line in a position where it could become pinched betwee…
All Foton Tunland vehicles imported and distributed by Foton Automotive Australia, the previous distributor, have isofix identification labels fitted to the outboard rear seats whi…
After the Adaptive Cruise Control has been overriden, the vehicle may experience unintended and continued acceleration.
Affected jacks do not comply with the requirements of the mandatory standard for vehicle jacks (based on the Australian/New Zealand Standard: AS/NZS 2693).
There is a defect with the engine crank case.
The front direction indicator lamp diagnostics do not provide the legally required double click/double flash warning required.
Certain motorcycles may run out of fuel while the fuel guage indicator shows fuel remaining, and in some cases before the low fuel warning lamp illuminates.
On certain Mazda6 (GJ) vehicles, the Powertrain Control Module (PCM) may function incorrectly, ceasing to charge the battery. This will illuminate the 'Charging system warning ligh…
A production fault has resulted in some side stands switches that are not correctly sealed.
Affected vehicles may exhibit friction wear on the driver's seat wiring harness. potentially causing an electrical malfunction or localised overheating.
It is possible, after prolonged race track like use that the toe link may fracture and separate from the rear sub frame.
The left rear positioning light may stop functioning as a result of a software failure. The error will illumiate the 'bulb failure light' and display a message in the Drivers Info…
The Ready Alert Braking System (RAB) may result in the driver experiencing a hard brake pedal feel.
During production a machining error on the clutch drum has led to the possiblity that a snap ring could displace. This may lead to transmission clutch slippage and result in the ve…
Due to overheating, the indicators may function incorrectly.
Due to overheating, the headlight may function incorrectly.