Every safety recall published by the Australian government, searchable and filterable.
Some of the brackets used to attach the two gas struts to the rear door hatch may not have been made to specification. At high temperature the increase in gas pressure may cause b…
The handbrake cable is too long and may exceed the mechanisms ability to lock in position properly which may result in the vehicle rolling away unless the transmission is in park.
The fault relates to the connection of the Supplementary Restraint System which was incorrect during assembly. In a collision the passenger side seat belt tensioner can activate in…
The fault relates to the bolts that secure the wishbone ball joints. These bolts may have acquired incorrect torque and as a consequence, may result in a shortened life span or bol…
The 1600Kg and 1800Kg Heavy Duty Goosenecks supplied separately and as part of any of the Ford Genuine Heavy Duty Towbar Kits may be susceptible to embrittlement which may result i…
The fuel hose leading to the right hand side of the vehicle can become chaffed between the fuel supply and return lines which can result in fuel escaping from the fuel distributor.
Possible loss of braking assistance due to the brake vacuum pipe and the engine wiring loom coming into contact and wearing through.
A cooling system gasket located below the throttle body housing may leak and expel fluid onto hot engine components.
The accumulator diaphragm on the booster may have been assembled incorrectly and if it fails will reduce the power assistance.
May be fitted with a low beam headlamp relay that could fail when the low beam headlamp is switched on or selected. This would result in the low beam headlamp not turning on.
Some vehicles may have been fitted with steering components that may be below specification with a consequent risk of failure.
Front seatbelt pretensioners can be deactivated because of a wiring harness fault under the front seats.
The fuel filler pipe band may leak due to possible movement of the fuel tank.
The fuel tank strainer joint connector may leak due to possible contact with the fuel tank.
Under extreme circumstances, the passenger airbag can deploy due to static electricity.
There may be an internal fault in the climate control unit which can cause the control unit to fail resulting in a loss of the windscreen demister function in the car.
The bracket supporting the splash guard for the brake valve assembly can cause inadvertent application of the trailer brake. This happens if the splash guard cracks. The bracket…
As a result of fatigue and under specific load conditions, the locking spring of the front seat belt buckle mechanism may weaken which can potentially release the seat belt buckle…
Due to material fatigue of the front seat belt buckle anchor plate on the inner seat rail runner, there is a potential risk the front seat belt buckle anchor plate may detach from…
Premature failure of cooling system hoses. Hose failure may cause a roadside breakdown. Important all traces of coolant are removed as if allowed to remain on hot engine componen…
Involves the fitting of an engine limiting device to all Titan vehicles fitted with Cummins engines.
Airglide 200 Swaybar Arm Fastening System.
Some vehicles may have incorrectly torqued bolts for the rear outboard seat belt anchorages.
Malfunction with the rear park brake.
Some of the affected vehicles may have been assembled with a misrouted battery cable, and/or a loose connection at the alternator B+ stud.