Every safety recall published by the Australian government, searchable and filterable.
Foot Operated Parking Brake Release Cable Routing Defect.
Potential Weakness Has Been Found In The Wheel Due To An Incorrect Machining Operation, And Under A High Load And Speed Condition A Failure May Occur.
Does Not Meet Fully The Requirements Of ADR 4/01. The Retractors Do Not Allow Easy Withdrawal Of The Webbing Through The Full Angular Ranged Specified By This ADR.
A Weld Associated With The Rear Suspension Links May Fracture And Could Impair The Stability Of The Rear Hub Assembly Resulting In The Vehicle Deviating From A Straight Line Under…
May Not Meet Fully The Requirements Of Adr 4/01. The Retractors Do Not Allow Easy Withdrawal Of The Webbing Through The Full Angular Range Specified By This Adr But Will Still Lock…
Do Not Fully Meet The Requirements Of Adr3/01. - The Retractors Do Not Allow Easy Withdrawal Of The Webbing Through The Full Angular Range Specified By This ADR.
Do Not Meet Fully The Requirements Of ADR 4/01. The Retractors Do Not Allow Easy Withdrawal Of The Webbing Through The Full Angular Range Specified By This ADR.
Road Speed Limiter Correctly Adjusted But Not Sealed In Accordance With Australian Design Rule.
Possibility Of Inadvertent Airbag Inflation.
An Engine Backfire May Occur Causing Either Left Or Right Throttle Body To Become Detached From The Inlet Manifold. In This Case The Fuel Line May Break As It Make Contact With Th…
The Fuel Tank Can Deform In The Area Of The Fuel Pump Flange And A Risk Of Fuel Leaking From This Area Exists.
Potential For Loss Of Pressure From The Fuel Pump Outlet Pipe Within The Fuel Tank. Under Extreme Circumstance This Could Lead To A Loss Of Vehicle Control.
Floor Mats May Interfere With The Accelerator Pedal Which Could Potentially Result In The Engine Not Returning To Idle.
Possibility Of Incorrect Tension Of Steering Rack Assembly Mounting Bolts During Vehicle Assembly.
The Service Brake May Fluctuate Out Of Specification Due To Cab Movement Which May Then Activate The Parking Brake During Operations On Some Machines.
The Seat Belt Webbing Could Snag In The Slot In The Guide Escutcheon And Not Retract Correctly Resulting In The Driver Not Being Adequately Restrained In The Event Of An Accident.
Radiator Cap
Possibility Of Deformed Wheel Rims Which May Cause Premature Tyre Deflation.
Voiding Of Lift And Multi-purpose Bucket Cylinder Resulting In Movement Of Lift Arms And/or Bucket Clam.
A Lower Ball Joint Swivel Pin May Not Have Been Tightened To The Correct Torque Specification Which May Lead To Ball Joint Failure.
The Timing Belt Tensioner Does Not Absorb Engine Vibrations Efficiently, Causing The Spring Installed On The Timing Belt Tensioner To Break Resulting In Timing Belt Becoming Loose…
Vehicles Fitted With Version 1.14 May Stall Whilst The Vehicle Is Moving Slowly.
Welds On Brackets Of Seat Groups May Fatigue And Seat May Become Unstable.
An Oil Leakage Problem Could Arise From Radiator Oil Delivery And Oil Return Hoses And Cylinder Head Oil Deivery Hoses.
The Right Hand Headlight And Turn Indicator Light Electrical Wiring Connector May Not Have Been Fitted With A Cable Tie. A Short Circuit Can Develop Between The Live And Earth Wire…