Every safety recall published by the Australian government, searchable and filterable.
Overheight - Non Compliance With ADR.
Due To A Casting Fault The Rim Clamps Could Be Defective.
The Ball Sockets On The Cruise Control Linkage May Break Causing The Linkage To Jam On Nearby Components Which Could Prevent The Engine Returning To Idle.
The Relays In The Door Lock Electronic Control Unit May Fail And Cause Their Contacts To Weld.
Potential Exists For A Failure Of The Power Door Lock Control Relays Which May Cause Contacts To Weld.
Broken Or Loose Screws Have Been Discovered On The Link Arm And Steering Failure May Occur.
The Tongue Retaining Bolt Is Only Torqued Finger Tight - Possible To Install The Tow Bar Assembly To A Vehicle Without Applying The Torque To The Retaining Bolt.
The Front Seat Belts Which Are Handed For Left And Right Hand Side Fitment Into Vehicle May Have Been Incorrectly Fitted.
Front Disc Brake Pads Binding In Caliper.
Check And/or Replace High Pressure Power Steering Hose.
Potential Exists For Failure Of Battery Cables Being Used As Replacement Units.
A Substandard Weld May Lead To Weld Separation At The Rim And Subsequent Loss Of Vehicle Control.
Steel Rhs Has 2mm Wall Thickness Instead Of 2.5mm.
May Have Had Defective Steel Wheel Rims Assembled In Australia In 1992.
A CO2 Weld On A Mckay Wheel May Fail.
It Is Possible That Vibration From Driving At High Speed On Corrugated Roads Can Cause Vibration, Cracking And Displacement Of Steering Shaft Joint Protector.
All Rear Brake Lights May Fail When The Brakes Are Applied On Vehicles Equipped With Centre High Mounted Stop Lamps When Anti-lock Brakes Are Also Fitted.
Following Salt Impregnation Moisture May Penetrate The Bonded Joint Between The Front Brake Pad Lining Material And The Brake Pad Backing Plate.
The Pressure Relief Valve May Have Been Damaged During Manufacture.
High Tension King Leads To The Ignition System May Touch Or Be In Close Proximity To The Injector Hose.
Accessory Rear Inner Facing Seat Kits Containing Non Standard Seat Belt Components.
Power Lead May Chafe Through Insulation When It Passes Through The Firewall Causing A Short Circuit.
Operating Knob Of Parking Brake Lever May Become Stuck When Applying The Hand Brake.
Panel Flex Condition May Cause Metal Fatigue In The Seat Belt Mounting Panel.
There Is A Risk That The Battery Cable (b+) May Chafe Against The Air Conditioning Pipe Resulting In Short Circuiting.