Every safety recall published by the Australian government, searchable and filterable.
Due to a manufacturing issue with welding of the gear change pedal arm and the change pedal boss, the gear pedal may crack or fall off.
Due to improper programming of the Hybrid Powertrain Control Module (HPCM) the engine may stall resulting in a loss of motive power accompanied by a warning light on the instrument…
The hood insulator may become damaged and come in contact with hot engine components resulting in an engine bay fire.
Due to a software issue, the automatic network search of the emergency call system (eCall) communication module may be deactivated. In this case, the automatic and manual emergency…
Due to a manufacturing issue with a hose in the automatic transmission, fluid may leak from the transmission which could result in a loss of motive power.
The driver's airbag inflator may rupture in the event of airbag deployment in the event of a crash.
Due to improper installation of the fuel pump retaining rings they may crack and result in a fuel leak. There is an additional risk of damage due to heat exposure from the engine a…
Due to a software fault in the vehicle’s Electronic Control Unit (ECU) a loss of motive power may occur while driving. If this should happen, warning lights would illuminate and th…
The mounting bolts that are used for the Rhino Rack Sunseeker awning may not meet manufacturing specifications and could break. If the bolts break this can lead to the awning becom…
The internal bracing upper mounts for the Genuine Isuzu Canopy Roof Rack may not meet the manufacturing specifications, should the mount become loose or detached it could result in…
The ball joints may wear prematurely.
The rear brake hoses may not meet manufacturing specifications and could be susceptible to heat damage, which may result in a sudden loss of rear braking performance. The front bra…
Due to a manufacturing defect, the rear suspension may fail in extreme driving situations. Should the suspension fail, this will impact vehicle handling which could result in a los…
The ignition coil may fail, which may cause the vehicle to experience misfires. This could lead to a reduction in expected performance, loss in power and/or an electrical short cir…
The VIN plate fitted may display incorrect load rating and tyre specifications. The incorrect information on the VIN plate might result in inappropriate tyres to be fitted.
The threaded nut connecting the brake servo and brake pedal may not meet manufacturing specifications. Should the threaded nut become loose the brake pedal will no longer function…
The electrical connectors of the side crash sensors may not meet manufacturing specifications. These sensors are used to determine when to deploy the airbags in the event of an acc…
The adhesive that holds the windshield in place may not meet manufacturing specifications, this may result in the windshield not being adequately secured to the vehicle.
The airbag control unit may not have been fitted correctly during manufacturing, this could result in an unintentional deployment of the airbag.
The jack provided with the vehicle does not comply with the mandatory standard for vehicle jacks 'Trade Practices Act 1974 Consumer Protection Notice No. 1 of 2010 Consumer Product…
Due to improper assembly of an oil seal in the automatic transmission, fluid may leak from the transmission which could result in a loss of drive.
Due to improper assembly of an oil seal in the automatic transmission, fluid may leak from the transmission which could result in a loss of drive.
Due to a manufacturing issue with the anti-lock braking system (ABS) module it is possible that excess grease may adhere to internal components. Continued use of the motorcycle, wi…
Due to a manufacturing issue with a braking component the Anti-Lock Brake System (ABS) and Electronic Stabilisation Control (ESC) function may fail under hard braking.
On some vehicles, it has been identified grease was not applied to the slide pins of the front wheel brake calipers. If the outer Brembo brake pad is continually used under the def…