Every safety recall published by the Australian government, searchable and filterable.
The left cushion connecting plate may have been reversed when fitted. Over time, the connecting plate may break.
The front fuel tank fuel lines may rub during operation, causing wear and damage to the fuel lines over time. Fuel may leak from damaged fuel lines.
An incorrect wiring harness configuration to the restraints control module (RCM) links the wrong seat belt buckle. This can cause the driver's seatbelt pre-tensioner to not functio…
The transmission stud may chafe on the engine wiring loom. The engine warning light may also illuminate.
The Hydraulic Electronic Control Unit (HECU), responsible for the Anti-lock Braking System, Electronic Stability Control System and Traction Control System, can remain live even wh…
The mounting bolts and nuts that are used to secure the axle assembly to the frame of the brush chipper may not have been tightened correctly. If the axle mounting bolts loosen, th…
As part of the production process, the B-Pillar that joins the floor panel structure may not be welded correctly.
The headlamp bulb thread may vibrate during certain engine speeds and may cause a headlamp to blow.
The child restraint system (CRS) top tethers may not be strong enough to keep a child seat securely fastened and may break during an accident.
In some vehicles, the nut holding the cab tilt cylinder has not been tightened. Because of this, the cab may fall forwards when it's tilted.
The gear recognition function in the transmission may not function as intended in some vehicles.This may cause the reversing lamp to stop working until the next ignition change, or…
A short circuit impacting the vehicle's electronic system may occur if the positive wiring to the starter motor becomes chafed. This wiring may become chafed as a result of regular…
There may be insufficient contact of the startup battery ground stud to the chassis.
The heat shield may not be in the proper position around the front driver airbag's inflator. When the airbag is triggered, hot gas may damage the airbag material or cause the airba…
The ground connection of the front passenger airbag may not meet the specifications. This may mean that an electrostatic charge could not be diverted via the ground connection and…
The right rear seat's belt bracket, used for fastening the child seat to the ISOFIX holder, may be missing. In this case, the child seat will not be securely fastened and attached…
The arrangement of the wiring to the refrigerator's 4-way fuse block and cover can generate heat that exceeds the heat capacity of the fuse block.
Due to a manufacturing defect, the wiring harness of the steering control unit may be damaged. The damage can allow water or moisture into the wiring harness, which can cause a sho…
Due to an adhesive failure, the sleeper cab vent windows, located on the driver and passenger side sleeper walls may separate from the vehicle.
In some vehicles the signal from the crankshaft position sensor may fail. This may result in an engine stall, as well as loss of the ability to restart the engine or loss of engine…
The hood hinges may loosen and may not hold the hood closed. The hood may unlatch and flip open or detach from the vehicle.
The plug connection from the wiring harness to the blower controller may deteriorate over time. This may cause the plug-in contact to short circuit or overheat.
The underbody water tank mounting rods may crack and the water tank may dislodge or fall off.
Due to improper manufacture, an exhaust cable may come into contact with the battery positive cable.
The stereo camera may mis-recognise roadside objects and/or miscalculate the travelling direction of an oncoming vehicle, resulting in the system unexpectedly activating the pre-co…