Every safety recall published by the Australian government, searchable and filterable.
In some of the affected vehicles, the front brake caliper material may not meet specification, causing the caliper to crack.If the front brake caliper cracks, the brake system warn…
Some vehicles may be fitted with front flexible brake hoses that are prone to failure where the brake hose has developed a twist when assembled to the vehicle. This could create a…
This recall is for two front brake issues:1. Front brake hose - a front brake hose could rupture if mileage is greater than 45 000 km and the vehicle is used under conditions that…
The internal grip assist handle located on the A-Pillar was not manufactured to the correct durability specification and may detach or break during use.
The rivets for the side step cover may corrode and fracture, especially if usage involves exposure to salt or anti-freeze agent.
Potential production issue with the manufacture of the throttle body. The intercooler sleeve may detach and cause the engine malfunction indicator to illuminate and a loss of engi…
The wall thickness of the brake master cylinder may not meet specifications.
Certain Passat and Arteon models with a Panorama sunroof installed within a limited production period have a bonded joint between the sunroof trim panel and the sunroof frame, whic…
Certain batches of sunroof motors had incorrect software installed and may not have an automatic safety stop function. When the sunroof is closing, it will not automatically stop w…
Over time, the front brake hose may be damaged. This may result in loss of brake fluid through leakage from the brake hose.
The engines may experience decreased air compressor output, impacting air braking.
The engines may experience decreased air compressor output, impacting air braking.
Due to a supplier assembly error, the seat belt buckle for the second-row middle seat may have been installed on the wrong side of the seat, thereby preventing proper use of the 3-…
The voltage setting applied to the LED Control Unit (LCU) is inadequate. As a result, oxide may be generated on the contact surface resulting in an increase in the contact resistan…
The rear leaf spring may fracture due to an insufficient diameter of the front eye.
The software in the powertrain control unit may not operate as intended. The engine warning light may not activate to warn the driver of the fault. A reset of the control unit migh…
A nut on the front seat rail may be missing in some vehicles. In the event of an accident, the seat structure and position may be unstable and possibly deform.
The ball joint casings on the front lower control may crack, due to an inappropriate production process.
Some vehicles equipped with Adaptive Cruise Control (ACC) may not allow the driver to cancel ACC in very specific driving conditions.
It is possible that the vehicles may mistakenly detect a correctly engaged seat belt as being not engaged. A warning tone and a warning symbol in the instrument cluster will inform…
It is possible that the vehicles may mistakenly detect a correctly engaged seat belt as being not engaged. A warning tone and a warning symbol in the instrument cluster will inform…
The airflow sensor located within the petrol engine may fail. Failure of the airflow sensor will be indicated by a deterioration in vehicle performance, causing the EV system warni…
Due to an issue with the car's software, the red brake wear warning light is not illuminated continuously when the brake pads are worn out. Only a yellow warning message is shown i…
Due to an issue with the car's software, the red brake wear warning light is not illuminated continuously when the brake pads are worn out. Only a yellow warning message is shown i…
The adjuster nut for the handbrake lever can loosen. This may prevent the handbrake from being fully applied.