Every safety recall published by the Australian government, searchable and filterable.
During vehicle assembly, Toyota brake fluid contains polymers that act as a lubricant for certain brake system components. If the replacement brake fluid used has insufficient poly…
The fuel suction tube assembly is located in the fuel tank and incorporates the fuel pump and wiring power supply.The fuel pump wire harness insulation has insufficient flexibility…
It is possible that during extreme weather conditions the air-conditioning fan relay may fail.
These vehicles had a previous safety recall campaign to download new lighting control software to the management system. There is a possibility that this software upgrade did not c…
There may be an electrical short circuit in the driver's airbag clockspring wiring connector. If the deviation occurs the supplemental restraint system lamp (SRS) will be permanent…
A situation may occur where the rider may need to exert a force greater than expected to turn the handlebar in order to correct the vehicle's trajectory. At this increased level of…
Due to the improper location of the ABS hydraulic unit ground wiring harness on affected trucks, water may infiltrate resulting in corrosion within the wiring connector.
These vehicles have been equipped with front bottom suspension arm cam-bolts that may be out of specification.
The position of the lighting control ring is incorrectly detected by the lighting management system.
Engine oil from the brake vacuum pump may enter the brake vacuum line, possibly allowing oil to enter the brake booster.
Engine oil from the brake vacuum pump may enter the brake vacuum line, possibly allowing oil to enter the brake booster.
Engine oil from the brake vacuum pump may enter the brake vacuum line, possibly allowing oil to enter the brake booster.
The outer steering arm bolt, that secures the steering arm to the knuckle, did not receive sufficeint heat treatment during the manufacture process.
The engine coolant bleeder hoses quick connectors may not sufficiently seal towards the spigot on the coolant expansion tank, potentially resulting in loss of engine coolant and/or…
On the vehicles affected there is the potential for the retractable ‘B’ mechanism to become corroded. In extreme cases, this may lead to flying ‘B’ mascot not retracting when stru…
When the motorcycle is ridden with either the Genuine Yamaha Accessory Aluminium Top Case (23P-W0754-00) or a similar aftermarket product, the Base box may develop a crack and even…
During manufacture incorrect headlights (left hand drive version) may have been fitted to the vehicle.
There is a design flaw with the wiring to the door trim illumination.
There is an issue with the wiring that controls the illumination of the speaker.
The gas pipe may have been fitted in the wrong area and may need to be moved.
When the vehicle is frequently accelerated and decelerated quickly on severely corrugated roads that specifically feature large numbers of cattle grid crossings, the rear tailshaft…
The Automatic Transmission Shift Cable Bracket fitted to affected vehicles may not meet specification. This may result in the bracket cracking or breaking.
There is the possibility that after extended periods of driving in severe road conditions, the bonnet striker may develop a fatigue fracture.
There is a possible non-conformity in the assembly of the wheelhouse and its repective heat shield.
There is a possibility that the Automatic Transmission Shift Cable Bracket fitted to the affected vehicles may have unnecessary welding and may not meet specification. This weld co…