Every safety recall published by the Australian government, searchable and filterable.
Due to a manufacturing defect, the bonding between the driveshaft and the engine/transmission flange may not be secured as intended. This could cause the connection to detach and r…
Due to a manufacturing issue, the radiator on some vehicles may not be properly secured. This could cause the radiator to move and may result in the loss of engine coolant. A loss…
The vehicle jack provided with certain vehicles may be faulty and also may not meet the requirements of the Australian Consumer Product Safety Standard. If a faulty vehicle jack is…
The vehicle jack provided with certain vehicles may be faulty and also may not meet the requirements of the Australian Consumer Product Safety Standard. If a faulty vehicle jack is…
The handlebar on affected motorcycles may have a weld quality issue that could lead to separation between the inner and outer sections of the handlebar. This could result in a loss…
Due to a manufacturing defect, the engine oil cooler lines may become damaged due to a contact point with the two cooler lines and may cause an oil leak. If this occurs, oil may le…
Due to a software error, during sudden acceleration the Hybrid System may fail to engage the limp mode safety feature of the vehicle. This could cause warning lights to illuminate…
Indian Motorcycle has determined the affected motorcycles may experience a failure at the coolant junction resulting in coolant loss during operation.
Due to a software issue, the rear-view camera may not display the rear-view image as intended.
Due to a manufacturing issue, the compression springs of the seat locking mechanisms in the third row may not have been installed correctly. In the event of an accident or hard bra…
Due to a software issue, when the master light switch is set to automatic light control, the headlights, tail lamps, park lamps and license plate lamps will be turned ON and the da…
The failure is caused by side loading of the coupling, which is at its greatest during slow speed manoeuvring while towing a triaxle dolly. This could cause the towed vehicle to de…
Due to a manufacturing issue, the seat belt pre-tensioner inflator may fracture when deployed in the event of an accident.
Due to a manufacturing issue, the solar panel may not have been bonded correctly to the body and could become loose and detach from the vehicle.
Due to a manufacturing defect, the circuit board in the Anti-Lock Braking System (ABS) module may short circuit when the components are exposed to moisture. This could result in a…
Due to a manufacturing defect, some track rods (between left and right wheel of the steered axle/s) were manufactured without the slots at the end of it. If the slot is missing, th…
The Shift lock holder may have been produced out of specification, as a result the shift lock mechanism may not return to the locked position allowing the gear selector to be moved…
The starter Emergency Control Switches enables the vehicle to be started whilst in gear. In the event of an Automated Manual Transmission (AMT) malfunction, using these switches wh…
The starter Emergency Control Switches enables the vehicle to be started whilst in gear. In the event of an Automated Manual Transmission (AMT) malfunction, using these switches wh…
Due to a manufacturing defect, the Exhaust Gas Recirculation (EGR) cooler may crack over time. If this occurs, preheated vaporised coolant will build up inside the engine air intak…
The tyres within this production range may not meet manufacturing specifications. As a result, a small separation may generate along the edge of the radial steel belts which may le…
Due to a manufacturing issue, the sunroof frame may not have been bonded correctly to the body and could become loose and detach from the vehicle.
Due to a manufacturing defect, the exhaust bracket fixing nuts may not have been tightened to specifications and could become loose or detach over time. This may cause hot exhaust…
Due to a manufacturing defect, when the ignition is switched off it may cause a surge within the Electronic Control Module (ECM). This may result in the rider being unable to resta…
Due to a software issue, the Electronic Parking Brake (EPB) may not operate as intended. This could result in the vehicle moving or rolling away if the gear selector is not in the…