Every safety recall published by the Australian government, searchable and filterable.
The driver's airbag inflator may rupture in the event of airbag deployment.
The rear brake hose may become damaged over time, due to relative movement between the hose and holding clip.
The fuel supply and return pipes located under the body may become damaged over time due to relative movement between the pipes and the body guidance ribs.
As a result of driving the vehicle for a long time, a micro crack may develop in the fuel supply line hose and may result in a fuel leak.
Sulfur fumes from axle oil may impair an electrical component in the differential locking module, affecting the normal functioning of the differential lock.
Misrouted harness wiring may become damaged by the lower lug on main frame headstock when the handlebars are rotated.
The positive terminal on the alternator may not have been tightened to specification during assembly. Should the terminal become loose, this may increase the resistance to the alt…
The motorcycle’s rear reflex reflector may become loose or fall off.
The electric lines and wiring harness for the side air bag that are routed near the frame for the rotating seats may get jammed and become damaged.
The screws for the turbocharger oil feed and oil return lines may not have been correctly tensioned during the assembly process.
This recall replaces and extends PRA2019/17596 (campaign RC2672).The X Class operator's manual contains an incorrect maximum roof loading. Roof loading may be from roof-top tents e…
The closure material of the engine plugs might fail as a result of high engine oil pressures, which may occur during hard driving. This could result in oil leaks. If enough oil lea…
In the event of an accident, with the cargo area loaded, the cargo could strike the backrest of the left rear seat, causing the back rest lock to fail.
The condensation drain hose of the air conditioning system may not have been correctly installed.
If the vehicle is involved in an accident, a bracket fitted on the vehicle body could collide with the fuel tank, resulting in damage to the fuel tank.
If the cooling system has to be refilled, air may become trapped in the cooling system which might result in insufficient cooling of the engine components.
In the front passenger seat, an installed child seat may be identified as a person, or a lightweight person may be identified as a child seat.
If the cooling system has to be refilled, air may become trapped in the cooling system, which might result in insufficient cooling of the engine components.
The durability of the bonding between the sunroof glass panel and the sliding roof frame on some vehicles might not meet specifications and the glass panel may separate from the ve…
The flexible steel cable connected to the seat belts on the outboard side of the front seats may fatigue and separate from the seat belt, resulting in the seat belt not restraining…
The Active Brake Assist system may mistakenly detect an obstacle and brake suddenly or unexpectedly.
These vehicles use software to control the hybrid system. The software is designed to put the system into a fail-safe mode if there is an internal component failure. This allows th…
The front brake pad friction material could potentially separate from the back plate, resulting in reduced braking performance.
The weld seams' strength on the rear bumper cross member might not meet the required specification.
The front seat belt buckle housings may not have been correctly manufactured.A correctly-fastened seat belt could be detected as not fastened. If this occurs, a seat belt warning l…