Every safety recall published by the Australian government, searchable and filterable.
The seat brackets in the rear cabin do not comply with Australian Design Rule (ADR 03/04) - Seats and Seat Anchorages requirements and may fail.
Due to a manufacturing defect, the sockets fitted to the turn signal lamps in the front headlight assembly may overheat and melt. If this occurs, the turn signal indicators may not…
Due to a manufacturing defect, moisture may enter the bumper wiring harness causing corrosion. This could result in reduced efficiency of the power assisted steering and a loss of…
Due to a manufacturing issue, the right and/or left curtain airbag/s may be fitted with a faulty gas generator. As a result, the airbags may not deploy as intended.
Due to a manufacturing defect, the engine crankcase clamping retainers may have been overtightened. This could result in seizure of the crankshaft bearing material, abnormal noise…
Due to a manufacturing defect, the retaining bolts on the left and right-side curtain airbags may not have been fastened with sufficient torque. As a result, the airbags may not de…
Due to a manufacturing defect, the child lock feature on the dual power sliding door may not operate as intended. As a result, the sliding door may be opened from the inside using…
Due to an incorrectly manufactured High-Pressure Fuel Pipe, poor sealing of the fuel system may occur resulting in a fuel leak.
Due to a software issue with the Electronic Control Unit (ECU) the vehicle may enter fail-safe mode. This may result in incorrect operation of lighting systems such as front and re…
Due to a manufacturing issue, the front passenger airbag may be fitted with a faulty gas generator. As a result, the airbag may not deploy as intended.
Due to a manufacturing defect, the gear selector switch may fail and send an incorrect signal to the main control unit. This may result in an unintended deceleration, stopping and…
Due to a manufacturing issue within the Body Control Module, the vehicle headlights, tail lamps, license plate lamps, brake lamps, and wipers may not operate as intended. This may…
Due to a manufacturing defect, the propeller shaft balance plate may not have been welded to the required specifications and could detach from the vehicle whilst driving.
Due to a manufacturing issue, the main cabin power cable may become loose. This may cause an electrical system failure and/or result in a vehicle fire.
Due to a software issue, there is a risk that the vehicle’s braking performance may be temporarily disabled if the car has been coasting downhill for at least 1 minute and 30 secon…
Due to a manufacturing issue, the rear shock absorber adjuster mounting tab may fracture. As a result, the shock absorber adjuster could loosen and contact the rear tyre causing a…
Due to a software issue, under certain driving conditions if the vehicle’s one-pedal drive function is activated it may lead to a loss of braking performance.Note: The vehicle is s…
Due to a software issue, the rear-view camera may not display the rear-view image whilst reversing as intended.
Due to a software issue, if a vehicle occupant places an obstruction such as a body part in the window space when the driver or passenger side windows are closing, the window may n…
Due to a manufacturing defect, the multi-purpose camera and/or the interior rear-view mirror on the windscreen may not have been bonded correctly and could detach. If this occurs,…
Due to a manufacturing defect, the engine crankcase sealing bolt may not meet specifications. As a result, engine oil may leak onto the road and come in contact with the rear tyre…
Due to a manufacturing defect, the fuel line sleeve may chafe against the support bracket and become damaged. If this occurs fuel may leak, potentially resulting in loss of motive…
Due to manufacturing defect, the turn signal indicator lamps may not operate as intended when the lever on the combination switch is activated. In addition, the instrument cluster…
Due to a manufacturing defect, moisture may enter the internal circuit board of the reverse lamps over time. As a result, the reverse lamps may not illuminate as intended. Also, th…
Due to a manufacturing defect, vehicle management systems connected to the fuse box may fail. If this occurs, it may lead to a sudden loss of motive power and/or a vehicle fire. Ce…