Every safety recall published by the Australian government, searchable and filterable.
The trailer ABS malfunction light does not illuminate.
Under certain conditions, the ISOFIX brackets may break as a result of vibration stress.
Some vehicles through normal wear and tear might develop a condition in which contact between the steering knuckle and the steering stop occurs.
The transaxle oil pump may experience a loss of hydraulic oil pressure due to an improperly manufactured transaxle oil pump.
The side and rear lift windows on the Nissan Genuine Tradesman Canopy where the windows stoppers are may cause the window to be out of alignment.
Under bonnet fuel hoses routed on top of the engine may chafe against a plastic moulded noise suppressing material retaining posts of the underside of the engine top cover. The Noi…
In the rear oxygen sensor electrical short-to-ground or short-to-battery, the sensor fails, but a Malfunction Indicator Light (MIL) or Engine Light warning does not illuminate.
The poor electrical connection may cause the vehicle to lose power assistance for the steering of the vehicle.
The electric power steering assistance may be interrupted due to improper harness layout and terminal wear. Manual steering control is maintained.
The sealing performance of the oil seal of the rear shock absorber may be insufficient due to using improper grease during the shock absorber manufacturing process.
The injectors’ fuel supply rail may pose a leak risk in the long-term.
The lower mount for the right rear seat belt may not have been fitted according to specification.
Possible non-conformity of the right front seat guide tracks.
Possible non-conformity of the right front seat guide tracks.
It is possible that the solar glass panel is insufficiently bonded to the sliding sunroof frame.
The electronic shift lever in the vehicle does not move like a conventional shifter and the driver may inadvertently fail to correctly engage the “PARK” position before exiting the…
The electronic shift lever in the vehicle does not move like a conventional shifter and the driver may inadvertently fail to correctly engage the “PARK” position before exiting the…
The hydraulic clutch system with black master cylinder on certain MY 2016 Touring and Softail motorcycles may exhibit a condition in which it may lose the ability to generate enou…
The dust gaiter/push-rod assembly in the brake master cylinder is defective.
On the affected vehicles, the welding between the fuel tank and rollover valve (ROV) may peel off, causing a fuel leak.
A pivot pin inside the twin buckle assembly for the right-hand rear and rear centre seatbelts may not have been assembled correctly and may translate sideways.
If the electric water pump in the cooling system for the hybrid drive system fails, the warning lamp will be turned on and the water temperature may rise. If the vehicle continues…
Due to incorrect Quality Control during the manufacturing process, the engine crankshaft bearings may fail and cause the engine to stop suddenly and be unable to be restarted.
A welded seam in the transmission dual clutch assembly may fracture resulting in a loss of drive.
The detent lever of the child lock can break because it was damaged during the production process. As a result of this an active child lock can unnoticeably be switched off. This m…