Every safety recall published by the Australian government, searchable and filterable.
Due to a software issue, the parking assist control unit in the vehicle that detects obstructions when reversing may not operate as intended.
Due to a software issue, the vehicle may accelerate without the pedal being depressed. This may result in unintended vehicle movement.Note: The vehicle can be stopped immediately b…
Due to a manufacturing defect, vehicles may have been assembled with missing seat mounting bolts. As a result, the seats may not be correctly secured to the vehicle and could move…
Due to a manufacturing defect, the outer sheath of the electrical cable connecting the fuse box and alternator may deteriorate and cause the wiring to be exposed. This may lead to…
Due to a manufacturing defect, the fuel control valve in the high-Pressure fuel pump could allow excess fuel to enter the pump. If this occurs, the engine could stall resulting in…
The rear double seat belt buckles may have been incorrectly anchored. As a result, when the centre seat belt is fastened the buckle could interfere with the left seat belt buckle a…
Due to a manufacturing defect, the fuel control valve in the high-Pressure fuel pump could allow excess fuel to enter the pump. If this occurs, the engine could stall resulting in…
A number of Toyota Hiace vehicles modified in accordance with Model Report MRE-000038 include a built-in hoist for lifting a wheelchair and a wheelchair tie-down and occupant restr…
Due to a manufacturing defect, in vehicles fitted with a dual control system the electrical terminals to the dual control relay may not operate as intended. If this occurs, it may…
Due to a software issue, the turn indicator light and/or the upper part of the Daytime Running Lights (DRL) may not operate as intended. This may result in reduced visibility.
Due to a software issue, the Integrated Charging Control Unit (ICCU) may develop an internal fault causing a warning light to illuminate on the instrument cluster and the 12 Volt b…
Due to a software issue, the Integrated Charging Control Unit (ICCU) may develop an internal fault causing the 12 Volt battery to stop charging. This could result in a loss of moti…
Due to a software issue in the Integrated Charging Control Unit, the auxiliary 12 Volt battery may not charge as intended, resulting in battery drainage and loss of motive power.
Due to a manufacturing variation, the regulator output wiring harness may chafe against the crankcase exterior and become damaged. As a result, the vehicle may experience loss of…
The tyres within this production range may not meet specifications and could develop cracking, deflation or deformation of the tyre tread. If this occurs, it could lead to a loss o…
A number of Toyota Hiace vehicles modified in accordance with Model Report MRE-000038 include a built-in hoist for lifting a wheelchair and a wheelchair tie-down and occupant restr…
Due to a software issue, the Malfunction Indicator Lamp (MIL) may not illuminate to alert the driver of a Diesel Oxidation Catalyst (DOC) efficiency emission related issue.
The rear cabin window polycarbonate panel may have poor adhesion. As a result, it may detach from the vehicle under certain driving conditions.
Due to a manufacturing defect, the propeller shaft may have not been welded to the required specifications. As a result, the propeller shaft may break at the welding point resultin…
Due to the failure of the turbo actuator module, the vehicle may inadvertently activate limp-home mode resulting in a gradual reduction of motive power whilst driving.
Due to a manufacturing defect in the Adaptive High Beam System cracks may develop over time resulting in the LED reflector detaching from the reflector motor inside the headlamp as…
Due to a programming issue, the Adaptive High Beam System (AHS) LED units (high beam) and AHS ECUs (Electronic Control Unit) may incorrectly detect the signals for switching from l…
Due to a manufacturing defect, the left rear brake pipe line may have been damaged during assembly. If this occurs, it could lead to a brake fluid leak resulting in reduced braking…
Due to a manufacturing issue with the side airbag mounting sensors, forceful closing of the driver or passenger door may cause unintended vibration of the mounting frame. If this o…
A production batch of oil filters had a manufacturing defect that can result in the threaded connection becoming loose at high RPM.As a result, oil could leak resulting in an engin…