Every safety recall published by the Australian government, searchable and filterable.
Due to a manufacturing defect, resettable circuit breakers may not have been fitted to the affected vehicles. As a result, the turn signals and external lamps may not operate as in…
Due to a manufacturing defect, some upper arm shaft on the front suspension arm may break. This may cause the tire to tilt and result in a loss of vehicle control.
Due to a manufacturing defect, insufficient sealing of the reverser system control unit may allow moisture to enter the unit. If this occurs, it could cause a short circuit leading…
Due to a manufacturing defect, resettable circuit breakers may not have been fitted to the affected vehicles. As a result, the turn signals and external lamps may not operate as in…
Due to a software issue, under certain driving conditions the power steering motor system may not operate as intended. This may result in a sudden increased steering effort whilst…
Due to a manufacturing defect, the mounting bolts connecting the brake pedal rod and the brake servo may not have been tightened to the sufficient torque and could become loose. If…
Due to a manufacturing defect, the engine air flow meter may miscommunicate with the Electronic Control Unit (ECU). As a result, it may cause the vehicle to enter limp mode leading…
Due to a software issue, the electric power steering system under certain driving conditions may become temporarily inoperable. Should this occur, steering will remain functional.…
The brake line may chafe against the Body Control Module (BCM) which may lead to a hole in the brake line overtime. If this occurs it could lead to a brake fluid leak resulting in…
Due to incorrect wheel bolts, the wheel’s connection bolts may not meet the required specification and become loose. If this occurs, it could cause the wheel to shift direction, po…
Due to a manufacturing issue, the cell modules installed in the high voltage battery may be defective, which could cause a thermal overload leading to a vehicle fire. Additionally,…
Due to a software defect, the Trailer Module (TRM) may lose communication with the vehicle when a trailer is connected. This can result in a loss of trailer braking performance and…
The vehicle's digital owner's manual may contain incorrect information regarding the location of the child seat anchor point, airbags, seatbelts and emergency assistance informatio…
Due to a software issue, the Instrument Panel Cluster (IPC) may fail to illuminate the visual vehicle speed, fuel level and other critical safety information.
Due to a software issue, the Instrument Panel Cluster (IPC) may fail to illuminate the visual vehicle speed, fuel level and other critical safety information.
Due to a manufacturing defect, the low-pressure fuel pump may not operate as intended and could result in the check engine and master warning indicators to illuminate on the combin…
A software issue in the Battery Management System (BMS) may cause an electrical short circuit while charging or parked leading to a vehicle fire.
A software issue in the Battery Management System (BMS) may cause an electrical short circuit while charging or parked leading to a vehicle fire.
Due to a manufacturing issue, the main wiring harness may be incorrectly routed causing the fuel feed hose to disconnect. If this occurs, fuel may leak in the presence of an extern…
The operation of the Electronic Power Steering System (EPS) may be impacted due to incorrect fitment of its wire harness during the installation of Toyota Genuine Bull Bar or Nudge…
Due to a manufacturing defect, the ball joint brackets mounting bolts on the front lower suspension arm may break. This may cause the wheel to change direction and result in a loss…
Due to a software issue, the second and third-row electric seat-folding mechanism may fail to detect an occupant or object and may not stop the folding function when activated.
Due to a software defect, the Integrated Trailer Module (ITRM) may lose communication with the vehicle when a trailer is connected. This can result in a loss of trailer braking per…
The third-row lower left and right seat belt anchorage bracket may contain a weld stud of insufficient strength. As a result, the seat belt may not operate as intended.
Due to a manufacturing defect, the cable connecting the handle of one or more of the doors to the internal release mechanism may have been incorrectly mounted and could detach. If…