Every safety recall published by the Australian government, searchable and filterable.
Due to a software issue, the headlamps may not operate as intended. This may result in a loss of headlights, front position lamps, daytime running lights and direction indicator fu…
Due to a manufacturing defect, the rear tail lamps may not illuminate as intended. If this occurs during dark conditions, the traffic behind will have reduced visibility and may n…
The tyres within this production range may not meet manufacturing specifications which may lead to deflation of the tyre and/or the tyre tread could detach partially or completely…
Due to a software issue, the Cruise Control function may not operate as intended and could cause unintentional acceleration when deactivated.
Due to a manufacturing defect, the left front suspension ball joint may have been incorrectly attached. This may result in a loss of vehicle control.
Due to a manufacturing defect, the DC-DC converter that supports charging the 12V battery may short circuit and overheat resulting in a vehicle fire.
Due to a manufacturing issue, the screw connection to the rear seat belts may not have been tightened sufficiently. As a result, the seat belts may not operate as intended.
A manufacturing defect in the wiring harness of the rear boot lid may cause intermittent operation of the rear-view camera, loss of satellite radio reception, inoperative luggage c…
Due to a manufacturing defect, the oil supply to the rear axle drive shaft bearing may not meet specification. As a result, the bearing may overheat and seize causing a loss of mot…
Due to a manufacturing issue, the engine may fail prematurely. If this occurs, engine oil and/or fuel vapor could be released into the engine bay and accumulate in the presence of…
The subject vehicles engine may exhibit abnormal noise and potentially seize. This may cause a sudden loss of motive power and/or a vehicle fire.
Due to a manufacturing defect, brake fluid may leak from the front brake flexible hoses. This could cause the brake fluid warning light to illuminate and may result in reduced brak…
Due to a manufacturing defect, the emergency exit signs are not correctly illuminated as required by the Australian Design Rules (ADR) 44/02.
Due to a manufacturing defect, the water tank brackets could fail resulting in the water tank dislodging from the underbody of the vehicle.
The internal circuit board of the remote control for ARB/WARN VR EVO winches can corrode if exposed to water. Corrosion of the remote control’s circuit board may cause the winch’s…
Due to a manufacturing issue, the seat belt pre-tensioner inflator cap may fracture when deployed in the event of an accident.
The front caliper mounting bolts may not meet manufacturing specifications and could loosen. This could result in a reduction or loss in braking performance.
Due to a software issue, some vehicles may experience a thermal overload. If this occurs, vehicle occupants may identify smoke or fire emanating from underneath the vehicle.
Due to a manufacturing defect, the front passenger airbag may not deploy as intended.
Due to a manufacturing defect, small cracks may form in the front lower suspension arms when driving on rough (corrugated) roads. As a result, the suspension may collapse or detach…
Due to a manufacturing defect, the hose connecting fuel tank may become damaged and corroded due to contact against the high voltage battery cover. If this occurs, fuel may leak in…
Due to a manufacturing defect, the interior footwell cover may cause interference with accelerator pedal.
Due to a manufacturing defect, the front seat frame may have been incorrectly welded. As a result, the welded connection could fracture and impair the restraint function of the se…
Due to a manufacturing defect, incorrectly installed rear coil springs may detach whilst driving. As a result, it could lead to a loss of vehicle control.
The electrical wiring of the Heating, Ventilation and Air Conditioning (HVAC) system fan blower may not meet specifications. This could cause overheating and may melt the plastic m…