Every safety recall published by the Australian government, searchable and filterable.
The rear crossmember may not have been manufactured according to specifications and could crack. If this occurs, the vehicle could experience a sudden loss of vehicle control.
Due to a manufacturing defect, the front right drive shaft may become loose and detach from the eDrive. If this occurs, it could lead to a sudden loss of motive power.Note: In an e…
Due to a manufacturing defect, the high voltage coolant heater (HVCH) may not operate as intended. If this occurs, the vehicle occupant may not be able to defrost the windscreen an…
Due to a manufacturing defect, the front left drive shaft may become loose and detach from the eDrive. If this occurs, it could cause a sudden loss of motive power.Note: In an even…
Due to a manufacturing defect, the fuel delivery unit may fail causing the fuel pump to switch off. If this occurs, it could impair the fuel supply to the engine resulting in a los…
Due to a manufacturing defect, the bonding of the inner and outer window panes may deteriorate over time. As a result, the outer window pane may detach from the vehicle.
The internal circuit board of the winches remote control can corrode if exposed to water. If corrosion of the circuit board occurs, the winch can cause the cable to stop, wind up o…
The fuse power stud located in the battery box may corrode over time. This may cause an electrical short circuit with the mounting bracket and could result in a vehicle fire.
Due to a manufacturing defect, the left front suspension ball joint may have been incorrectly attached. This may result in a loss of vehicle control.
If the subject vehicles are continuously operated without inspection, the engine may exhibit abnormal noise and potentially seize. This may cause a sudden loss of motive power and…
Due to a manufacturing defect, the rear-view camera wiring harness may become damaged and could cause the rear-view image to become distorted or flicker.
Due to a manufacturing issue, the joint between the coolant pipe and the temperature sensor may not be sealed adequately. This could cause a coolant leak resulting in a vehicle fir…
Due to a software issue, the headlamps may not operate as intended. This may result in a loss of headlights, front position lamps, daytime running lights and direction indicator fu…
Due to a manufacturing defect, the rear tail lamps may not illuminate as intended. If this occurs during dark conditions, the traffic behind will have reduced visibility and may n…
The tyres within this production range may not meet manufacturing specifications which may lead to deflation of the tyre and/or the tyre tread could detach partially or completely…
Due to a software issue, the Cruise Control function may not operate as intended and could cause unintentional acceleration when deactivated.
Due to a manufacturing defect, the left front suspension ball joint may have been incorrectly attached. This may result in a loss of vehicle control.
A soot sensor component may not have been installed as intended. As a result, the vehicle may release air pollutants that exceed the standards set in Australian Design Rule (ADR) 8…
Due to a manufacturing defect, the DC-DC converter that supports charging the 12V battery may short circuit and overheat resulting in a vehicle fire.
Due to a manufacturing issue, the screw connection to the rear seat belts may not have been tightened sufficiently. As a result, the seat belts may not operate as intended.
A manufacturing defect in the wiring harness of the rear boot lid may cause intermittent operation of the rear-view camera, loss of satellite radio reception, inoperative luggage c…
Due to a manufacturing defect, the oil supply to the rear axle drive shaft bearing may not meet specification. As a result, the bearing may overheat and seize causing a loss of mot…
Due to a manufacturing issue, the engine may fail prematurely. If this occurs, engine oil and/or fuel vapor could be released into the engine bay and accumulate in the presence of…
Vehicles equipped with carbon ceramic-matrix brakes have an independent electronic parking brake with a roll away prevention feature that can put excessive pressure on the brake ro…
The subject vehicles engine may exhibit abnormal noise and potentially seize. This may cause a sudden loss of motive power and/or a vehicle fire.