Every safety recall published by the Australian government, searchable and filterable.
Due to a manufacturing issue, the plunger in the camshaft chain tensioner may deteriorate over time and could become locked. This could result in an unexpected loss of vehicle powe…
The air-spring strut on the left and right of the front axle may not meet manufacturing specifications. This could cause the front strut to become dislodged and release air from th…
Due to a manufacturing defect, one or both the tailgate strikers may have been misaligned during assembly. This may result in an unintended tailgate opening while the vehicle is in…
Due to a manufacturing defect, the park pawl system that locks the transmission when the shift lever is in park may not operate as intended. This could result in the vehicle movin…
Due to a manufacturing defect, the park pawl system that locks the transmission when the shift lever is in park may not operate as intended. This could result in the vehicle movin…
Due to variations in production, a crack may develop in the Printed Circuit Board (PCB) of the Transmission Electric Oil Pump (EOP) which may lead to failure of the EOP.
Due to an issue during manufacture, the Hydraulic Control Unit Anti-lock Brake System module may not perform as intended. If this occurs, the brake lights may illuminate or allow t…
Honda Genuine accessory window tint applied to the front (door) side windows does not meet specifications and may be too dark and reduce visibility.
BYD is conducting a Voluntary Safety Recall on all affected vehicles. The rear centre seat child restraint anchorage and front passenger seat as a safety precaution should not be u…
Due to a production defect, the main wiring harness may come into contact with the frame of the electric powertrain and result in damage to the harness. If this occurs, the vehicl…
The heater core element may operate at a higher than intended temperature causing damage to the electrical connector. If this occurs it may result in a vehicle fire.
Due to a manufacturing defect, the safety chain fitted to the caravan may be underrated for the caravan’s Aggregate Trailer Mass (ATM). In the event of the caravan unhitching from…
The mechanical couplings installed may not be suitable for the vertical load as per the Aggregate Trailer Mass (ATM) specified on the compliance plate. If loaded beyond capacity, t…
The front leaf spring suspension U-bolts may not have been tightened sufficiently and may separate from the suspension. This could cause reduced stability while driving and result…
The front leaf spring suspension U-bolts may not have been tightened sufficiently and may separate from the suspension. This could cause reduced stability while driving and result…
Due to the design of the fuel tank vent tube assembly, there is a possibility it could develop a stress related crack. A stress related crack over time could expand to eventually a…
Due to a manufacturing defect, the interior wiring harness may become chafed due to being incorrectly routed through the centre console. This may cause a short circuit and result i…
Due to a manufacturing defect, the circuit board in the Anti-Lock Braking System (ABS) module may short circuit when the components are exposed to moisture. This could result in a…
Due to a manufacturing issue, the seat belt pre-tensioner inflator cap may fracture when deployed in the event of an accident.
Due to a software issue, the front windscreen wipers may fail. In the event of rain this may lead to poor visibility for the driver.
Due to a manufacturing defect, the transverse link bushes fitted to the front axle may have been incorrectly welded. This could cause the transverse link to fracture causing the fr…
One of the temperature sensors of Diesel Particulate Filter (DPF) could fail. As a result, the vehicle’s Electronic Control Unit (ECU) may activate the limp home mode safety featur…
Due to a manufacturing issue, the seat belt pre-tensioner inflator may fracture when deployed in the event of an accident.
Due to a manufacturing issue, the fuel pump may fail during operation. This will result in an unexpected loss of vehicle power.
Due to a manufacturing defect, the electrical connections for the 12 Volt battery in the boot may detach in the event of a collision. As a result, the eCall, seat adjustment, hazar…