Every safety recall published by the Australian government, searchable and filterable.
In some of the affected vehicles, the front brake caliper material may not meet specification, causing the caliper to crack.If the front brake caliper cracks, the brake system warn…
Some vehicles may be fitted with front flexible brake hoses that are prone to failure where the brake hose has developed a twist when assembled to the vehicle. This could create a…
This recall is for two front brake issues:1. Front brake hose - a front brake hose could rupture if mileage is greater than 45 000 km and the vehicle is used under conditions that…
The short bleeder hose may become degraded and cracked, causing coolant leakage.
The internal grip assist handle located on the A-Pillar was not manufactured to the correct durability specification and may detach or break during use.
The rivets for the side step cover may corrode and fracture, especially if usage involves exposure to salt or anti-freeze agent.
Potential production issue with the manufacture of the throttle body. The intercooler sleeve may detach and cause the engine malfunction indicator to illuminate and a loss of engi…
On the affected vehicles, the front windscreen wipers may become inoperative due to a defective relay contained within the Front Body Control Module (F-BCM).
The wall thickness of the brake master cylinder may not meet specifications.
Certain Passat and Arteon models with a Panorama sunroof installed within a limited production period have a bonded joint between the sunroof trim panel and the sunroof frame, whic…
On Caddy vehicles of a limited production period, the front backrest padding may have been fitted incorrectly. In the event of a collision, the side airbags may not adequately depl…
Certain batches of sunroof motors had incorrect software installed and may not have an automatic safety stop function. When the sunroof is closing, it will not automatically stop w…
Over time, the front brake hose may be damaged. This may result in loss of brake fluid through leakage from the brake hose.
The engines may experience decreased air compressor output, impacting air braking.
The engines may experience decreased air compressor output, impacting air braking.
Due to a supplier assembly error, the seat belt buckle for the second-row middle seat may have been installed on the wrong side of the seat, thereby preventing proper use of the 3-…
The air conditioner housing may have collided with the airbag control unit during assembly, therefore the airbag control unit may be damaged.
The high beam can no longer be deactivated using the high beam lever until manually activated by the driver. The high beam can be deactivated by turning the rotary light switch to…
The coolant hose between the radiator and expansion tank may have been misrouted during assembly. A misrouted hose may come into contact with the exhaust header pipe, potentially c…
The voltage setting applied to the LED Control Unit (LCU) is inadequate. As a result, oxide may be generated on the contact surface resulting in an increase in the contact resistan…
The rear leaf spring may fracture due to an insufficient diameter of the front eye.
The software in the powertrain control unit may not operate as intended. The engine warning light may not activate to warn the driver of the fault. A reset of the control unit migh…
A nut on the front seat rail may be missing in some vehicles. In the event of an accident, the seat structure and position may be unstable and possibly deform.
The ball joint casings on the front lower control may crack, due to an inappropriate production process.
The airbag sensors in the sides of the vehicle may not have been tensioned sufficiently.