Every safety recall published by the Australian government, searchable and filterable.
On affected vehicles, if the water drain in the area of the panoramic sunroof is not functioning properly, water can seep into the vehicle’s headliner.
The emergency locking retractor in the front passenger safety belt assembly may not function correctly.
Fuel may leak from the fuel delivery pipe.
The lower handlebar holder may have been manufactured with improper paint application. Additionally, thread locking agent may not have been adequately applied to the stud bolt thre…
On affected vehicles a possible non-compliance of an electrical relay's internal component might disrupt the starter control.
Possible exposure to air and moisture may cause the driver's airbag to inflate abnormally.
The front passenger airbag may not function properly due to a deviation in generant mix ratio.
Variations in the mixture ratio of the airbag propellant may prevent the airbag and/or the belt tensioner from deploying in the event of an accident.
The front passenger airbag inflator may be susceptible to moisture intrusion over time due to insufficient protection against moisture absorption into the propellant.
In all of the affected vehicles, localised overheating of the engine cylinder head, due to a lack of coolant circulation, may cause the cylinder head to crack, causing an oil leak.
Affected vehicles have inadvertently been built without the airbag label on the passenger side sun visor. On affected vehicles there is no visible airbag label when the sun visor i…
The power steering high pressure hose may separate over time as a result of incorrect clamp fittings. If this occurs, the power steering fluid may leak.
On affected vehicles, there are irregularities in the mix ratio of the igniting agent in some airbag units or belt tensioners which could lead to the airbags/belt tensioners not tr…
A number of 5.0L Mustang vehicles may have reduced clearance between the battery cable wiring loom and the exhaust manifold.
The front seat belt pretensioner may not function properly due to a deviation in the seatbelt initiator generant mix ratio in some initiators.
As it gets older, a combination of high temperatures and humidity can cause the airbag inflator propellant to degrade.
Panorama sunroof wind deflector plate was not secured correctly during assembly and may detach while vehicle is in motion and interfere with the sunroof glass.
1. Engine vibration transmitted to the fuel tank may cause the spot weld of the bracket to break.2. Corrosion of the switch electrical terminals may develop due to water contaminat…
Fuel hoses on specific motorcycle VINs may be faulty, which could cause a fuel leak.
The fuel filter element installed on the engine may crack if the engine is started and stopped frequently as durability of the fuel filter element is not enough to endure changes i…
The under floor mounted diesel fuel cooler may leak. A fuel odour may be noticed and over time, drivers may notice an increase in fuel consumption and in some cases liquid fuel pud…
If the fuel tank is overfilled, particular handling conditions could cause fuel to reach the carbon canister. If this occurs, it may stop the EVAP system from managing fuel vapours…
The mixture of chemicals used in front passenger airbags on certain vehicles may not meet specification, which may result in the initiator not properly functioning and the front pa…
The tooth flank depth in the serration of the splines may not be sufficient for the required transmission of force between the steering column and the spindle.
The installation of the under floor fuel pipe assembly has insufficient clearance between the under floor fuel pipes and the vehicle under shield and body, leading to a chafe condi…