Every safety recall published by the Australian government, searchable and filterable.
Due to a software issue with the Electronic Control Unit (ECU) the vehicle may enter fail-safe mode. This may result in incorrect operation of lighting systems such as front and re…
Due to a manufacturing issue, the front passenger airbag may be fitted with a faulty gas generator. As a result, the airbag may not deploy as intended.
Due to a manufacturing defect, the gear selector switch may fail and send an incorrect signal to the main control unit. This may result in an unintended deceleration, stopping and…
Due to a manufacturing issue within the Body Control Module, the vehicle headlights, tail lamps, license plate lamps, brake lamps, and wipers may not operate as intended. This may…
Due to a manufacturing defect, the propeller shaft balance plate may not have been welded to the required specifications and could detach from the vehicle whilst driving.
Due to a manufacturing issue, the main cabin power cable may become loose. This may cause an electrical system failure and/or result in a vehicle fire.
Due to a software issue, there is a risk that the vehicle’s braking performance may be temporarily disabled if the car has been coasting downhill for at least 1 minute and 30 secon…
Due to a manufacturing issue, the rear shock absorber adjuster mounting tab may fracture. As a result, the shock absorber adjuster could loosen and contact the rear tyre causing a…
Due to a software issue, under certain driving conditions if the vehicle’s one-pedal drive function is activated it may lead to a loss of braking performance.Note: The vehicle is s…
Due to a software issue, the rear-view camera may not display the rear-view image whilst reversing as intended.
Due to a software issue, if a vehicle occupant places an obstruction such as a body part in the window space when the driver or passenger side windows are closing, the window may n…
Due to a manufacturing defect, the multi-purpose camera and/or the interior rear-view mirror on the windscreen may not have been bonded correctly and could detach. If this occurs,…
Due to a software programming issue, the Dynamic Stability Control (DSC) module may fail to illuminate the visual warning lights.
Due to a manufacturing defect, the engine crankcase sealing bolt may not meet specifications. As a result, engine oil may leak onto the road and come in contact with the rear tyre…
Due to a manufacturing defect, the fuel line sleeve may chafe against the support bracket and become damaged. If this occurs fuel may leak, potentially resulting in loss of motive…
Due to manufacturing defect, the turn signal indicator lamps may not operate as intended when the lever on the combination switch is activated. In addition, the instrument cluster…
Due to a manufacturing defect, moisture may enter the internal circuit board of the reverse lamps over time. As a result, the reverse lamps may not illuminate as intended. Also, th…
Due to a manufacturing defect, vehicle management systems connected to the fuse box may fail. If this occurs, it may lead to a sudden loss of motive power and/or a vehicle fire. Ce…
Due to a manufacturing defect, vehicle management systems connected to the fuse box may fail. If this occurs, it may lead to a sudden loss of motive power and/or a vehicle fire. Ce…
Due to a manufacturing defect, the top seal in the steering bevel unit is susceptible to water and dust ingress. As a result, the steering may become notchy and potentially lock wh…
The connecting rod and/or crankshaft engine components may have manufacturing defects that can lead to engine damage and engine failure. This may result in a no start condition, en…
Due to a manufacturing defect, the front suspension swivel housing may not meet specifications. As a result, the connection between the axles and the steering arms could fail leadi…
Due to a manufacturing defect, the left-hand engine camshaft sprocket may fracture. As a result, the engine could stall leading to a sudden loss of motive power whilst driving.
The driver’s seat belt safety cap may have been incorrectly installed and could become loose. As a result, the seat belt may not operate as intended.
Due to a software issue, under certain driving conditions the Integrated Electronic Brake (IEB) system may affect the hydraulic pressure within the Anti-lock Braking System (ABS).…