Every safety recall published by the Australian government, searchable and filterable.
Due to a manufacturing issue, the rear turn indicators may not illuminate correctly.
Due to a manufacturing defect, a damaged front seat belt pre-tensioner tube may have been installed on the seat belt retractor. As a result the seat belt pre-tensioner may not oper…
Due to a manufacturing defect, a damaged front seat belt pre-tensioner tube may have been installed on the seat belt retractor. As a result the seat belt pre-tensioner may not oper…
Due to a manufacturing defect, the brake booster may fail. If this occurs the stopping distance in the un-boosted condition would exceeds the distance prescribed by the Australian…
Due to a manufacturing issue, the Electronic Park Brake (EPB) adaptor cord connector may not operate as intended. This could result in vehicle moving or rolling away whilst the veh…
Due to a manufacturing defect, the rear window may have pressure on it as a seal has shrunk causing the window to shatter.
The front wheel well to body panels may not have been sealed according to manufacturing specifications. Moisture may enter the interior of the body via the front wheel wells and ca…
Due to a manufacturing issue, the Handlebar Stem bolt may break. If this occurs the vehicle may experience a sudden loss of steering.
The front engine shield and the Active Grille Shutter (AGS) system located under the front of the vehicle requires modifications. In the event of an engine failure and oil/fuel rup…
Due to a manufacturing issue, the oil supply in the oil strainer to the turbochargers may become clogged and affect engine operation.
Due to a software issue, the rear-view camera may not display the rear-view camera image as intended.
Due to a software issue with the airbag control unit, the airbag warning lamp and warning message may not be illuminated in the instrument cluster as intended. If this occurs the v…
Due to manufacturing issues, the exhaust tail pipe outlet may have been directed towards the left-hand side of the vehicle, resulting in exhaust gases being discharged towards pede…
Due to a manufacturing issue, the window divider on the right rear side could become loose and may detach from the vehicle whilst driving.
Due to a software issue with the In-Vehicle Infotainment (IVI) unit, the rear-view camera display may not display the rear camera image as intended.
Due to a manufacturing defect, the power steering software system may not operate correctly. This may result in a loss of steering control.
The label with the required safety information and instructions may not have been affixed to the vehicle jack as required. This may result in inappropriate use of the vehicle jack.
The steering box mounting bolts may not have been tightened sufficiently and could become loose. This could result in a knocking noise and rattling of the steering wheel whilst tur…
Due to a manufacturing issue, the roller tonneau front cover screws may become loose and fall out. If this occurs the tonneau front cover may detach from the vehicle while driving.
Due to a manufacturing defect, the front axle brake line hose(s) may become dislodged from the end fitting crimp. This may cause a reduction in braking performance or an unintended…
Due to a manufacture issue, the seat belt pre-tensioner inflator may fracture when deployed in the event of an accident.
Due to improper assembly during production, the left door latching mechanism may have been incorrectly positioned and could become loose over time. As a result the left door may no…
If the rear fog lamp is switched ON after the ignition has been switched OFF and the driver’s door opened, the audible warning will not sound.
Due to a manufacturing defect, the incorrect brake disc may have been fitted to the front wheel. This may cause a reduction in the vehicle braking performance.
Due to a manufacturing issue, the connector to the Heater Core may overheat due to a faulty electrical connection. This may cause excess heat in the connection. If this occurs it…