Every safety recall published by the Australian government, searchable and filterable.
Due to a manufacturing defect, the gear shift shaft may have been incorrectly welded. As a result, the rider may be unable to change gears leading to a loss of motive power whilst…
Due to a manufacturing issue, the undercarriage of the affected trailers may experience stress, which could lead to the metal chassis cracking. As a result, components of the trail…
Due to a manufacturing defect, the front seat belt Automatic Locking Retractors (ALR) may engage earlier than intended and lock the retractor when an occupant is attempting to fast…
The seat brackets in the rear cabin do not comply with Australian Design Rule (ADR 03/04) - Seats and Seat Anchorages requirements and may fail.
The propeller shaft may not meet manufacturing specifications and could fail. As a result, the vehicle will experience a loss of motive power whilst driving.
The propeller shaft may not meet manufacturing specifications and could fail. As a result, the vehicle will experience a loss of motive power whilst driving.
The Gear Drive Unit (GDU) assembly bolts may not have been tightened to the torque sufficiently causing it to possibly fail and result in a loss of motive power.
Due to a software issue within the Engine Management Control (EMC) unit, the Hydraulic Brake Compensation (HBC) system may not operate as intended. This could lead to reduced braki…
Due to an improper manufacturing process, a component within the fuel pump could swell causing the fuel pump to become inoperative.
A software issue in the Battery Management System (BMS) may cause deactivation of the high voltage battery. As a result, the vehicle may experience a loss of propulsion whilst driv…
The clutch plates within the hybrid transmission may not meet manufacturing specifications. As a result, the clutch plates may overheat causing material degradation and potential t…
Due to a software issue, the Hybrid Powertrain Control Module (HPCM) may inadvertently shift to neutral while driving, come to a stop and automatically shifting to “Park”. If this…
Due to a manufacturing defect, the oil filter housing may not meet specifications and could crack over time. If this occurs, oil could leak into the engine bay and accumulate in th…
Due to a manufacturing defect, the oil filter housing may not meet specifications and could crack over time. If this occurs, oil could leak into the engine bay and accumulate in th…
Due to improper routing during assembly, the wiring harness leading to the vehicle’s horn may become damaged or disconnected. As a result, when the steering is operated at its limi…
Due to a software issue, the engine control software requires updating to ensure compliance with engine emission performance requirements.
Due to a manufacturing defect, there is a possibility of engine machining debris contamination within the engine. This could lead to potential engine knocking, rough running and/or…
The hood latch striker rivet studs may have been assembled with insufficient deformation. If this occurs, at high speeds small gaps between the hood and front bumper could develop.…
The Exhaust Gas Recirculation (EGR) valve sensor may have been exposed to soldering flux contamination during manufacture. This could cause a short circuit within the sensor result…
Due to a manufacturing issue, the cell modules installed in the high voltage battery may be defective. A short circuit could cause a thermal overload and result in a vehicle fire o…
Due to a manufacturing defect, the low-pressure fuel delivery line may not meet specifications. This could result in the vehicle encountering fuel evaporation outside the requireme…
Due to a software issue within the Power Steering Control Module (PSCM) the Lane Change Warning Assist (LCWA) feature may not operate as intended. As a result, there is an increase…
The charge cables fitted to the vehicles are missing the required Regulatory Compliance Mark (RCM) certification label specified by the Electrical Equipment Safety Systems / Austra…
Due to a manufacturing defect, the High-Pressure Fuel pump may cause over-pressurisation in the fuel system. This could impair the fuel supply to the engine and result in warning l…
Due to a manufacturing issue, the cell modules installed in the high voltage battery may be defective. A short circuit could cause a thermal overload and result in a vehicle fire o…